implement configurable keylayoutHEADmaster

2 files changed, 21 insertions, 9 deletions

diff --git a/README.md b/README.md
index da90a2b..baaf08c 100644
--- a/README.md
+++ b/README.md
@@ -7,8 +7,15 @@ Another mysterious tool that detects things. Inspired by [chuni-hands](https://g
 # Usage Notes
 In most cases you will not need to turn on keybinds output option (unless you are doing something custom)
 
-If you are using this with UMIGURI and are using [brokenithm-evolved-ios-umi](https://git.moekyun.me/pinapelz/brokenithm-evolved-ios-umi), keybinds option is not needed.
+If you are using this with UMIGURI and are using [brokenithm-evolved-ios-umi](https://gitea.tendokyu.moe/pinapelz/brokenithm-evolved-ios-umi), keybinds option is not needed.
 
 The UI will lag when the update rate is set to low, its recommended that you first configure using a high update rate, then set it as low as possible for use to ensure minimal latency.
 
-*It takes some time to start up, so please be patient*.
\ No newline at end of file
+*It takes some time to start up, so please be patient*.
+
+- Low-quality webcams will make detection difficult
+- Expanding the areas of the air-zones will allow for higher accuracy, as it takes the average lighting within a larger area
+- The GUI "scales", please adjust window height accordingly (i love tkinter yep.)
+
+# Config
+On first launch a `config.json` file will be created. Saving your configs from the UI will write to this file, unsaved changes wil be lost.
\ No newline at end of file
diff --git a/chuni-hands-evolved.py b/chuni-hands-evolved.py
index 9859d9c..cda7010 100644
--- a/chuni-hands-evolved.py
+++ b/chuni-hands-evolved.py
@@ -19,12 +19,12 @@ zones = [
 ]
 
 _UMIGIRI_32_AIRZONE_LAYOUT = {
-    0: "o",
-    1: "0",
-    2: "p",
-    3: "l",
-    4: ",",
-    5: ".",
+    0: ".",
+    1: ",",
+    2: "P",
+    3: "L",
+    4: "O",
+    5: "0",
 }
 
 base_positions = [{"x": zone["x"], "y": zone["y"]} for zone in zones]
@@ -200,6 +200,7 @@ def setup_gui(camera_width: int, camera_height: int, preview_width: int, preview
             "width": int(width_var.get()),
             "camera_index": current_camera_index,
             "chuniio_enabled": chuniio_enabled.get(),
+            "layout": _UMIGIRI_32_AIRZONE_LAYOUT
         }
         with open(CONFIG_FILE, "w") as f:
             json.dump(config, f)
@@ -350,9 +351,13 @@ def load_config() -> dict:
         return {}
 
 def main():
-    global root, current_camera_index, cap, video_canvas, x_slider, y_slider, width_var, spacing_slider, sensitivity_var, keystrokes_enabled, chuniio_enabled, update_rate, CAMERA_WIDTH, CAMERA_HEIGHT, latest_frame, running
+    global root, current_camera_index, cap, video_canvas, x_slider, y_slider, width_var, spacing_slider, sensitivity_var, keystrokes_enabled, chuniio_enabled, update_rate, CAMERA_WIDTH, CAMERA_HEIGHT, latest_frame, running, _UMIGIRI_32_AIRZONE_LAYOUT
     print("Now starting up... please wait a bit...")
     config = load_config()
+    if config.get("layout") is not None:
+        print("Loading key-layout from config")
+        _UMIGIRI_32_AIRZONE_LAYOUT = {int(k): v for k, v in config.get("layout").items()}
+        print(_UMIGIRI_32_AIRZONE_LAYOUT)
     current_camera_index = config.get("camera_index", 0)
     cap = cv2.VideoCapture(current_camera_index)
     cap.set(cv2.CAP_PROP_FRAME_WIDTH, CAMERA_WIDTH)