diff options
Diffstat (limited to 'upgrade.sh')
| -rwxr-xr-x | upgrade.sh | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/upgrade.sh b/upgrade.sh deleted file mode 100755 index 45624c4f..00000000 --- a/upgrade.sh +++ /dev/null @@ -1,216 +0,0 @@ -#!/usr/bin/env bash -# /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ # -# for Semi-Manual upgrading your system. -# NOTE: requires rsync - -# Set some colors for output messages -OK="$(tput setaf 2)[OK]$(tput sgr0)" -ERROR="$(tput setaf 1)[ERROR]$(tput sgr0)" -NOTE="$(tput setaf 3)[NOTE]$(tput sgr0)" -INFO="$(tput setaf 4)[INFO]$(tput sgr0)" -WARN="$(tput setaf 1)[WARN]$(tput sgr0)" -CAT="$(tput setaf 6)[ACTION]$(tput sgr0)" -MAGENTA="$(tput setaf 5)" -ORANGE="$(tput setaf 214)" -WARNING="$(tput setaf 1)" -YELLOW="$(tput setaf 3)" -GREEN="$(tput setaf 2)" -BLUE="$(tput setaf 4)" -SKY_BLUE="$(tput setaf 6)" -RESET="$(tput sgr0)" - -printf "\n%.0s" {1..1} -echo -e "\e[35m - ╦╔═┌─┐┌─┐╦ ╔╦╗┌─┐┌┬┐┌─┐ - ╠╩╗│ ││ │║ ║║│ │ │ └─┐ 2025 - ╩ ╩└─┘└─┘╩═╝ ═╩╝└─┘ ┴ └─┘ upgrade.sh -\e[0m" -printf "\n%.0s" {1..1} - -# On Ubuntu/Debian, warn about required Hyprland version and prompt to continue -if grep -iqE '^(ID_LIKE|ID)=.*(ubuntu|debian)' /etc/os-release >/dev/null 2>&1; then - echo "${WARNING} These Dotfiles are only supported on Hyprland 0.51.1 or greater. Do not install on older revisions.${RESET}" - while true; do - echo -n "${CAT} Do you want to continue anyway? (y/N): ${RESET}" - read _continue - _continue=$(echo "${_continue}" | tr '[:upper:]' '[:lower:]') - case "${_continue}" in - y|yes) - echo "${NOTE} Proceeding on Ubuntu/Debian by user confirmation." - break - ;; - n|no|"") - printf "\n%.0s" {1..1} - echo "${INFO} Aborting per user choice. No changes made." - printf "\n%.0s" {1..1} - exit 1 - ;; - *) - echo "${WARN} Please answer 'y' or 'n'." - ;; - esac - done -fi - -echo "${WARNING}A T T E N T I O N !${RESET}" -echo "${SKY_BLUE}This script is meant to manually upgrade your KooL Hyprland Dots${RESET}" -echo "${YELLOW}NOTE that you should edit this script and assign an Directory or Files exclusion${RESET}" -printf "\n%.0s" {1..1} -echo "${MAGENTA}If you are not sure what you are doing,ran the ${SKY_BLUE}copy.sh${RESET} ${MAGENTA}instead${RESET}" -printf "\n%.0s" {1..1} -read -p "${CAT} - Would you like to proceed (y/n): ${RESET}" proceed - -if [ "$proceed" != "y" ]; then - printf "\n%.0s" {1..1} - echo "${INFO} Installation aborted. ${SKY_BLUE}No changes in your system.${RESET} ${YELLOW}Goodbye!${RESET}" - printf "\n%.0s" {1..1} - exit 1 -fi - -# Create Directory for Upgrade Logs -if [ ! -d Upgrade-Logs ]; then - mkdir Upgrade-Logs -fi - -LOG="Upgrade-Logs/upgrade-$(date +%d-%H%M%S)_upgrade_dotfiles.log" - -# source and target versions -source_dir="config" -target_dir="$HOME/.config" - -# Specify the update source directories, their corresponding target directories, and their exclusions -declare -A directories=( - ["config/hypr/"]="$HOME/.config/hypr/" - ["config/kitty/"]="$HOME/.config/kitty/" - ["config/Kvantum/"]="$HOME/.config/Kvantum/" - ["config/nvim/"]="$HOME/.config/nvim/" - ["config/qt5ct/"]="$HOME/.config/qt5ct" - ["config/qt6ct/"]="$HOME/.config/qt6ct/" - ["config/rofi/"]="$HOME/.config/rofi/" - ["config/swaync/"]="$HOME/.config/swaync/" - ["config/waybar/"]="$HOME/.config/waybar/" - ["config/cava/"]="$HOME/.config/cava/" - ["config/ags/"]="$HOME/.config/ags/" - ["config/quickshell/"]="$HOME/.config/quickshell/" - ["config/fastfetch/"]="$HOME/.config/fastfetch/" - ["config/wallust/"]="$HOME/.config/wallust/" - ["config/wlogout/"]="$HOME/.config/wlogout/" - # Add more directories to compare as needed -) - -# Update the exclusion rules -declare -A exclusions=( - ["config/hypr/"]="--exclude=UserConfigs/ --exclude=UserScripts/" - ["config/waybar/"]="--exclude=config --exclude=style.css" - ["config/rofi/"]="--exclude=.current_wallpaper" - ["config/quickshell/"]="--exclude=shell.qml" - # Add more exclusions as needed -) - -# Function to compare directories -compare_directories() { - local source_dir="$1" - local target_dir="$2" - local exclusion="${exclusions[$source_dir]}" # Get exclusions for the source directory - - # Perform dry-run comparison using rsync with exclusions - diff=$(rsync -avn --delete "$source_dir" "$target_dir" $exclusion) - echo "$diff" -} - -# Function to create backup of target directory -create_backup() { - local target_dir="$1" - local backup_suffix="-b4-upgrade" - local target_base=$(basename "$target_dir") - local backup_dir="$HOME/.config/${target_base}${backup_suffix}" - - if [ -d "$backup_dir" ]; then - echo "$NOTE Updating existing backup of the $target_dir..." - rsync -av --delete "$target_dir" "$backup_dir" - echo "$NOTE $backup_dir Backup updated successfully." 2>&1 | tee -a "$LOG" - else - echo "$NOTE Creating backup of the $target_dir..." - rsync -av --exclude="${backup_suffix}" "$target_dir" "$backup_dir"/ - echo "$NOTE $backup_dir Backup created successfully." 2>&1 | tee -a "$LOG" - fi -} - -# Check if the version file exists in target directory, if not exit -target_version_file=$(find "$target_dir/hypr" -name 'v*' | sort -V | tail -n 1) -if [ -z "$target_version_file" ]; then - echo "$ERROR Version number not found in ~/.config/hypr/" 2>&1 | tee -a "$LOG" - echo "$ERROR Upgrade your dots first by running ./copy.sh" 2>&1 | tee -a "$LOG" - exit 1 -fi - -# Get the stored version from the target directory -stored_version=$(basename "$target_version_file") - -# Get the latest version from the source directory -source_version_file=$(find "$source_dir/hypr" -name 'v*' | sort -V | tail -n 1) -latest_version=$(basename "$source_version_file") - -# Function to compare versions -version_gt() { test "$(printf '%s\n' "$@" | sort -V | head -n 1)" != "$1"; } - -# Compare versions -if version_gt "$latest_version" "$stored_version"; then - echo "$CAT newer version ($latest_version) is available. Do you want to upgrade? (Y/N)" 2>&1 | tee -a "$LOG" - read -r answer - if [[ "$answer" =~ ^[Yy]$ ]]; then - # Loop through directories for comparison - for source_directory in "${!directories[@]}"; do - target_directory="${directories[$source_directory]}" - echo "$YELLOW Comparing directories: $source_directory and $target_directory" $RESET - # Compare source and target directories - comparison=$(compare_directories "$source_directory" "$target_directory") - if [ -n "$comparison" ]; then - echo "$NOTE Here are difference of $source_directory and $target_directory:" - echo "$comparison" - - printf "\n%.0s" {1..2} - - # Prompt user for action - echo "$CAT Do you want to copy files and directories from $source_directory to $target_directory? (Y/N)" - read -r answer - - if [[ "$answer" =~ ^[Yy]$ ]]; then - # Creating backup of the target directory - create_backup "$target_directory" - - printf "\n%.0s" {1..2} - # Copy differences from source directory to target directory - rsync -av --delete ${exclusions[$source_directory]} "$source_directory" "$target_directory" - echo "$NOTE Differences of "$target_directory" copied successfully." 2>&1 | tee -a "$LOG" - printf "\n%.0s" {1..2} - else - echo "$NOTE No changes were made for $target_directory" 2>&1 | tee -a "$LOG" - fi - else - echo "$OK No differences found between $source_directory and $target_directory" 2>&1 | tee -a "$LOG" - fi - done - printf "\n%.0s" {1..2} - echo "$NOTE Files or directories updated successfully to version $latest_version" 2>&1 | tee -a "$LOG" - - # Set some files as executable - chmod +x "$HOME/.config/hypr/scripts/"* 2>&1 | tee -a "$LOG" - chmod +x "$HOME/.config/hypr/UserScripts/"* 2>&1 | tee -a "$LOG" - # Set executable for initial-boot.sh - chmod +x "$HOME/.config/hypr/initial-boot.sh" 2>&1 | tee -a "$LOG" - - else - echo "$MAGENTA Upgrade declined. No files or directories changed" 2>&1 | tee -a "$LOG" - fi -else - echo "$OK 👌 No upgrade found. The installed version ${MAGENTA}($stored_version)${RESET} is up to date with the KooL Hyprland-Dots version ${YELLOW}($latest_version)${RESET}" 2>&1 | tee -a "$LOG" -fi - -printf "\n%.0s" {1..3} -echo "$(tput bold)$(tput setaf 3)ATTENTION!!!! VERY IMPORTANT NOTICE!!!! $(tput sgr0)" -echo "$(tput bold)$(tput setaf 7)If you updated waybar directory, and you have your own waybar layout and styles $(tput sgr0)" -echo "$(tput bold)$(tput setaf 7)Copy those files from the created backup ~/.config/waybar-b4-upgrade $(tput sgr0)" -echo "$(tput bold)$(tput setaf 7)Make sure to set your waybar and style before logout or reboot $(tput sgr0)" -echo "$(tput bold)$(tput setaf 7)SUPER CTRL B for Waybar Styles and SUPER ALT B for Waybar Layout $(tput sgr0)" -printf "\n%.0s" {1..3} |