12 files changed, 78 insertions, 12 deletions
diff --git a/config/hypr/UserConfigs/00-Readme b/config/hypr/UserConfigs/00-Readme
index b39873b1..275919bb 100644
--- a/config/hypr/UserConfigs/00-Readme
+++ b/config/hypr/UserConfigs/00-Readme
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 
 KooL's Hyprland-Dots
 
diff --git a/config/hypr/UserConfigs/01-UserDefaults.conf b/config/hypr/UserConfigs/01-UserDefaults.conf
index 7a91336f..dd5f299a 100644
--- a/config/hypr/UserConfigs/01-UserDefaults.conf
+++ b/config/hypr/UserConfigs/01-UserDefaults.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 
 # This is a file where you put your own default apps, default search Engine etc
 
diff --git a/config/hypr/UserConfigs/ENVariables.conf b/config/hypr/UserConfigs/ENVariables.conf
index 67861b86..e2b3498a 100644
--- a/config/hypr/UserConfigs/ENVariables.conf
+++ b/config/hypr/UserConfigs/ENVariables.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # Environment variables. See https://wiki.hyprland.org/Configuring/Environment-variables/
 
 # Set your defaults editor through ENV in ~/.config/hypr/UserConfigs/01-UserDefaults.conf
diff --git a/config/hypr/UserConfigs/LaptopDisplay.conf b/config/hypr/UserConfigs/LaptopDisplay.conf
index 9f766582..a9129190 100644
--- a/config/hypr/UserConfigs/LaptopDisplay.conf
+++ b/config/hypr/UserConfigs/LaptopDisplay.conf
@@ -1,3 +1,9 @@
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # NOTE, THIS FILE IS BEING USED by disabling Laptop display monitor behaviour when closing lid.
 # See notes on Laptops.conf
 
diff --git a/config/hypr/UserConfigs/Laptops.conf b/config/hypr/UserConfigs/Laptops.conf
index 463f0b46..b4e3cbdc 100644
--- a/config/hypr/UserConfigs/Laptops.conf
+++ b/config/hypr/UserConfigs/Laptops.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # See https://wiki.hyprland.org/Configuring/Keywords/ for more variable settings
 # These configs are mostly for laptops. This is addemdum to Keybinds.conf
 
diff --git a/config/hypr/UserConfigs/Startup_Apps.conf b/config/hypr/UserConfigs/Startup_Apps.conf
index f87bbe15..8a3de78a 100644
--- a/config/hypr/UserConfigs/Startup_Apps.conf
+++ b/config/hypr/UserConfigs/Startup_Apps.conf
@@ -1,3 +1,8 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # Commands and Apps to be executed at launch
 
diff --git a/config/hypr/UserConfigs/UserAnimations.conf b/config/hypr/UserConfigs/UserAnimations.conf
index f2d33d93..aebff1be 100644
--- a/config/hypr/UserConfigs/UserAnimations.conf
+++ b/config/hypr/UserConfigs/UserAnimations.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 
 animations {
   enabled = yes
diff --git a/config/hypr/UserConfigs/UserDecorations.conf b/config/hypr/UserConfigs/UserDecorations.conf
index eaccff80..d962092f 100644
--- a/config/hypr/UserConfigs/UserDecorations.conf
+++ b/config/hypr/UserConfigs/UserDecorations.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # Decoration Settings
 
 # Hyprland Wiki Links
diff --git a/config/hypr/UserConfigs/UserKeybinds.conf b/config/hypr/UserConfigs/UserKeybinds.conf
index 82a7e568..cc19ff78 100644
--- a/config/hypr/UserConfigs/UserKeybinds.conf
+++ b/config/hypr/UserConfigs/UserKeybinds.conf
@@ -1,11 +1,15 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # This is where you put your own keybinds. Be Mindful to check as well ~/.config/hypr/configs/Keybinds.conf to avoid conflict
 # if you think I should replace the Pre-defined Keybinds in ~/.config/hypr/configs/Keybinds.conf , submit an issue or let me know in DC and present me a valid reason as to why, such as conflicting with global shortcuts, etc etc
 
 # See https://wiki.hyprland.org/Configuring/Keywords/ for more settings and variables
 # See also Laptops.conf for laptops keybinds 
 
-# /* ---- ✴️ Variables ✴️ ---- */  #
 $mainMod = SUPER
 $scriptsDir = $HOME/.config/hypr/scripts
 $UserScripts = $HOME/.config/hypr/UserScripts
diff --git a/config/hypr/UserConfigs/UserSettings.conf b/config/hypr/UserConfigs/UserSettings.conf
index 9bd9131d..51b0adbd 100644
--- a/config/hypr/UserConfigs/UserSettings.conf
+++ b/config/hypr/UserConfigs/UserSettings.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # User Settings
 # This is where you put your own settings as this will not be touched during update 
 # if the upgrade.sh is used.
diff --git a/config/hypr/UserConfigs/WindowRules.conf b/config/hypr/UserConfigs/WindowRules.conf
index 79fbc24e..b6d65135 100644
--- a/config/hypr/UserConfigs/WindowRules.conf
+++ b/config/hypr/UserConfigs/WindowRules.conf
@@ -1,7 +1,18 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 # For window rules and layerrules
 # See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
 
 # This file is used to add or overwrite window rules 
 # This file will not be modified during dotfiles updates
 
+
+#  Optional Layer rules
+#  To Resolve blurred corners in rofi  Uncomment
+# layerrule = blur on, ignore_alpha 0, match:namespace rofi
+
+
diff --git a/config/hypr/UserConfigs/WorkSpaceRules.conf b/config/hypr/UserConfigs/WorkSpaceRules.conf
index 78d61389..7d45ec16 100644
--- a/config/hypr/UserConfigs/WorkSpaceRules.conf
+++ b/config/hypr/UserConfigs/WorkSpaceRules.conf
@@ -1,4 +1,9 @@
-# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# ==================================================
+#  KoolDots (2026)
+#  Project URL: https://github.com/LinuxBeginnings
+#  License: GNU GPLv3
+#  SPDX-License-Identifier: GPL-3.0-or-later
+# ==================================================
 
 # NOTE: THIS IS NOT BEING SOURCED by hyprland
 # It is only here as a guide if you want to do it manually