diff options
22 files changed, 271 insertions, 209 deletions
diff --git a/config/hypr/configs/ENVariables.conf b/config/hypr/UserConfigs/ENVariables.conf index 4437c641..031acae3 100644 --- a/config/hypr/configs/ENVariables.conf +++ b/config/hypr/UserConfigs/ENVariables.conf @@ -20,9 +20,9 @@ env = MOZ_ENABLE_WAYLAND,1 # NVIDIA # This is from Hyprland Wiki. As a start, WLR_NO_HARDWARE_CURSORS 1 will be activated if nvidia gpu detected -#env = WLR_NO_HARDWARE_CURSORS,1 -#env = LIBVA_DRIVER_NAME,nvidia -#env = __GLX_VENDOR_LIBRARY_NAME,nvidia +env = WLR_NO_HARDWARE_CURSORS,1 +env = LIBVA_DRIVER_NAME,nvidia +env = __GLX_VENDOR_LIBRARY_NAME,nvidia #env = GBM_BACKEND,nvidia-drm #env = __NV_PRIME_RENDER_OFFLOAD,1 diff --git a/config/hypr/configs/LaptopDisplay.conf b/config/hypr/UserConfigs/LaptopDisplay.conf index d50c9119..d50c9119 100644 --- a/config/hypr/configs/LaptopDisplay.conf +++ b/config/hypr/UserConfigs/LaptopDisplay.conf diff --git a/config/hypr/configs/Laptops.conf b/config/hypr/UserConfigs/Laptops.conf index 17047320..0a12d7fa 100644 --- a/config/hypr/configs/Laptops.conf +++ b/config/hypr/UserConfigs/Laptops.conf @@ -2,7 +2,9 @@ # See https://wiki.hyprland.org/Configuring/Keywords/ for more variable settings # These configs are mostly for laptops. This is addemdum to Keybinds.conf + $configs = $HOME/.config/hypr/configs +$UserConfigs = $HOME/.config/hypr/UserConfigs $mainMod = SUPER $scriptsDir = $HOME/.config/hypr/scripts @@ -37,9 +39,9 @@ bind = $mainMod ALT, F6, exec, $scriptsDir/ScreenShot.sh --in10 # Screenshot in # NOTE: Display for laptop are being generated into LaptopDisplay.conf # This part is to be use if you do not want your main laptop monitor to wake up during say wallpaper change etc -#bindl = , switch:off:Lid Switch,exec,echo "monitor = eDP-1, preferred, auto, 1" > $configs/LaptopDisplay.conf -#bindl = , switch:on:Lid Switch,exec,echo "monitor = eDP-1, disable" > $configs/LaptopDisplay.conf +#bindl = , switch:off:Lid Switch,exec,echo "monitor = eDP-1, preferred, auto, 1" > $UserConfigs/LaptopDisplay.conf +#bindl = , switch:on:Lid Switch,exec,echo "monitor = eDP-1, disable" > $UserConfigs/LaptopDisplay.conf # for laptop-lid action (to erase the last entry) -#exec-once = echo "eDP-1, preferred, auto, 1" > $HOME/.config/hypr/configs/LaptopDisplay.conf +#exec-once = echo "eDP-1, preferred, auto, 1" > $HOME/.config/hypr/UserConfigs/LaptopDisplay.conf ############################################################################## diff --git a/config/hypr/configs/Monitors.conf b/config/hypr/UserConfigs/Monitors.conf index ac87862a..ac87862a 100644 --- a/config/hypr/configs/Monitors.conf +++ b/config/hypr/UserConfigs/Monitors.conf diff --git a/config/hypr/configs/Execs.conf b/config/hypr/UserConfigs/Startup_Apps.conf index ef5b8ad5..6593268f 100644 --- a/config/hypr/configs/Execs.conf +++ b/config/hypr/UserConfigs/Startup_Apps.conf @@ -2,6 +2,7 @@ #Commands & Apps to be executed at launch $scriptsDir = $HOME/.config/hypr/scripts +$UserscriptsDir = $HOME/.config/hypr/UserScripts $lock = $scriptsDir/LockScreen.sh $SwwwRandom = $scriptsDir/WallpaperRandom.sh $WallpaperPath = $HOME/Pictures/wallpapers @@ -33,7 +34,7 @@ exec-once = wl-paste --type text --watch cliphist store exec-once = wl-paste --type image --watch cliphist store # Rainbow borders -exec-once = $scriptsDir/RainbowBorders.sh +exec-once = $UserscriptsDir/RainbowBorders.sh # sway-idle with lock only exec-once = swayidle -w timeout 900 '$lock' diff --git a/config/hypr/UserConfigs/UserKeybinds.conf b/config/hypr/UserConfigs/UserKeybinds.conf new file mode 100644 index 00000000..f55f0d5e --- /dev/null +++ b/config/hypr/UserConfigs/UserKeybinds.conf @@ -0,0 +1,29 @@ +## /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ ## +# This is where you put your own keybinds. Be Mindful to check as well ~/.config/hypr/configs/Keybinds.conf to avoid conflict +# if you think I should replace the Pre-defined Keybinds in ~/.config/hypr/configs/Keybinds.conf , submit an issue or let me know in DC and present me a valid reason as to why, such as conflicting with global shortcuts, etc etc + +# See https://wiki.hyprland.org/Configuring/Keywords/ for more settings and variables +# See also Laptops.conf for laptops keybinds + +$mainMod = SUPER +$files = thunar +$term = kitty +$scriptsDir = $HOME/.config/hypr/scripts +$UserScripts = $HOME/.config/hypr/UserScripts + +# rofi App launcher +bindr = $mainMod, $mainMod_L, exec, pkill rofi || rofi -show drun -modi drun,filebrowser,run,window +bind = $mainMod, D, exec, pkill rofi || rofi -show drun -modi drun,filebrowser,run,window + +bind = $mainMod, Return, exec, $term # Launch terminal +bind = $mainMod, T, exec, $files + +# User Added Keybinds +bind = $mainMod SHIFT, O, exec, $UserScripts/ZshChangeTheme.sh # Change oh-my-zsh theme + +# For passthrough keyboard into a VM +# bind = $mainMod ALT, P, submap, passthru +#submap = passthru +# to unbind +#bind = $mainMod ALT, P, submap, reset +#submap = reset diff --git a/config/hypr/UserConfigs/UserSettings.conf b/config/hypr/UserConfigs/UserSettings.conf new file mode 100644 index 00000000..338658a4 --- /dev/null +++ b/config/hypr/UserConfigs/UserSettings.conf @@ -0,0 +1,145 @@ +## /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ ## +# User Settings +# This is where you put your own settings as this will not be touched during update + +## refer to Hyprland wiki for more info https://wiki.hyprland.org/Configuring/Variables + +# Sourcing colors generated by pywal +source = $HOME/.cache/wal/colors-hyprland +# blurls = waybar +# blurls = rofi + +dwindle { + pseudotile = yes + preserve_split = yes + special_scale_factor = 0.8 +} + +master { + new_is_master=1 + new_on_top=1 + mfact = 0.5 +} + +general { + sensitivity=1.00 + apply_sens_to_raw=1 + gaps_in = 4 + gaps_out = 8 + border_size = 2 + resize_on_border = true + + col.active_border = $color0 $color2 $color4 $color6 $color8 90deg + col.inactive_border = $backgroundCol + + layout = master +} + +group { + col.border_active = $color15 + + groupbar { + col.active = $color0 + } +} + +decoration { + rounding = 8 + + active_opacity = 1.0 + inactive_opacity = 0.9 + fullscreen_opacity = 1.0 + + dim_inactive = true + dim_strength = 0.1 + + drop_shadow=true + shadow_range=6 + shadow_render_power = 1 + col.shadow = $color2 + col.shadow_inactive = 0x50000000 + + blur { + enabled = true + size = 5 + passes = 2 + ignore_opacity = true + new_optimizations = true + } +} + +animations { + enabled = yes + + bezier = myBezier, 0.05, 0.9, 0.1, 1.05 + bezier = linear, 0.0, 0.0, 1.0, 1.0 + bezier = wind, 0.05, 0.9, 0.1, 1.05 + bezier = winIn, 0.1, 1.1, 0.1, 1.1 + bezier = winOut, 0.3, -0.3, 0, 1 + bezier = slow, 0, 0.85, 0.3, 1 + bezier = overshot, 0.7, 0.6, 0.1, 1.1 + bezier = bounce, 1.1, 1.6, 0.1, 0.85 + bezier = sligshot, 1, -1, 0.15, 1.25 + bezier = nice, 0, 6.9, 0.5, -4.20 + + animation = windowsIn, 1, 5, slow, popin + animation = windowsOut, 1, 5, winOut, popin + animation = windowsMove, 1, 5, wind, slide + animation = border, 1, 10, linear + animation = borderangle, 1, 180, linear, loop + animation = fade, 1, 5, overshot + animation = workspaces, 1, 5, wind + animation = windows, 1, 5, bounce, popin +} + +input { + kb_layout=us + kb_variant= + kb_model= + kb_options=grp:alt_shift_toggle + kb_rules= + repeat_rate=50 + repeat_delay=300 + numlock_by_default=1 + left_handed=0 + follow_mouse=1 + float_switch_override_focus=0 + + touchpad { + disable_while_typing=1 + natural_scroll=0 + clickfinger_behavior=0 + middle_button_emulation=1 + tap-to-click=1 + drag_lock=0 + } +} + +gestures { + workspace_swipe=1 + workspace_swipe_fingers=3 + workspace_swipe_distance=400 + workspace_swipe_invert=1 + workspace_swipe_min_speed_to_force=30 + workspace_swipe_cancel_ratio=0.5 + workspace_swipe_create_new=1 + workspace_swipe_forever=1 +} + +misc { + disable_hyprland_logo = true + disable_splash_rendering = true + mouse_move_enables_dpms = true + #vrr = 0 + enable_swallow = true + no_direct_scanout = true #for fullscreen games + focus_on_activate = false + swallow_regex = ^(kitty)$ + #disable_autoreload = true +} + +binds { + workspace_back_and_forth=1 + allow_workspace_cycles=1 + pass_mouse_when_bound=0 +} diff --git a/config/hypr/configs/WindowRules.conf b/config/hypr/UserConfigs/WindowRules.conf index a3a77cfb..a3a77cfb 100644 --- a/config/hypr/configs/WindowRules.conf +++ b/config/hypr/UserConfigs/WindowRules.conf diff --git a/config/hypr/scripts/RainbowBorders.sh b/config/hypr/UserScripts/RainbowBorders.sh index 1f5e6cdb..1f5e6cdb 100755 --- a/config/hypr/scripts/RainbowBorders.sh +++ b/config/hypr/UserScripts/RainbowBorders.sh diff --git a/config/hypr/scripts/Weather.py b/config/hypr/UserScripts/Weather.py index 154c1589..154c1589 100755 --- a/config/hypr/scripts/Weather.py +++ b/config/hypr/UserScripts/Weather.py diff --git a/config/hypr/scripts/Weather.sh b/config/hypr/UserScripts/Weather.sh index 40048710..40048710 100755 --- a/config/hypr/scripts/Weather.sh +++ b/config/hypr/UserScripts/Weather.sh diff --git a/config/hypr/scripts/ZshChangeTheme.sh b/config/hypr/UserScripts/ZshChangeTheme.sh index 7057ed2e..7057ed2e 100755 --- a/config/hypr/scripts/ZshChangeTheme.sh +++ b/config/hypr/UserScripts/ZshChangeTheme.sh diff --git a/config/hypr/configs/Keybinds.conf b/config/hypr/configs/Keybinds.conf index c36c0804..84b78cff 100644 --- a/config/hypr/configs/Keybinds.conf +++ b/config/hypr/configs/Keybinds.conf @@ -1,25 +1,15 @@ ## /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ ## +# Default Keybinds -# See https://wiki.hyprland.org/Configuring/Keywords/ for more settings and variables -# See also Laptops.conf for laptops keybinds $mainMod = SUPER -$files = thunar -$browser = firefox -$term = kitty $scriptsDir = $HOME/.config/hypr/scripts -# rofi App launcher -bindr = $mainMod, $mainMod_L, exec, pkill rofi || rofi -show drun -modi drun,filebrowser,run,window -bind = $mainMod, D, exec, pkill rofi || rofi -show drun -modi drun,filebrowser,run,window - -bind = $mainMod, Return, exec, $term # Launch terminal bind = CTRL ALT, Delete, exec, hyprctl dispatch exit 0 bind = $mainMod SHIFT, Q, closewindow, bind = $mainMod SHIFT, F, togglefloating, bind = $mainMod ALT, F, exec, hyprctl dispatch workspaceopt allfloat bind = $mainMod, F, fullscreen bind = $mainMod, Q, killactive, -bind = $mainMod, T, exec, $files bind = CTRL ALT, L, exec, $scriptsDir/LockScreen.sh bind = CTRL ALT, P, exec, $scriptsDir/Wlogout.sh @@ -36,10 +26,6 @@ bind = $mainMod, Space, exec, $scriptsDir/ChangeLayout.sh # Toggle Master or Dwi bind = $mainMod ALT, V, exec, $scriptsDir/ClipManager.sh # Clipboard Manager bind = $mainMod SHIFT, N, exec, swaync-client -t -sw # swayNC panel - -# MISC (Miscellaneous Keybinds) -bind = $mainMod SHIFT, O, exec, $scriptsDir/ZshChangeTheme.sh # Change oh-my-zsh theme - # Wallpaper related keybinds bind = $mainMod, W, exec, $scriptsDir/WallpaperSelect.sh # Select wallpaper to apply bind = CTRL ALT, W, exec, $scriptsDir/Wallpaper.sh # Random wallpapers @@ -61,7 +47,7 @@ bind = $mainMod SHIFT, M, exec, hyprctl dispatch splitratio -0.3 # group bind = $mainMod, G, togglegroup -bind = ALT, tab, changegroupactive # change focus to another window +bind = ALT, tab, changegroupactive #change focus to another window # Special Keys / Hot Keys bind = , xf86audioraisevolume, exec, $scriptsDir/Volume.sh --inc #volume up @@ -164,11 +150,3 @@ bind = $mainMod, comma, workspace, e-1 # Move/resize windows with mainMod + LMB/RMB and dragging bindm = $mainMod, mouse:272, movewindow bindm = $mainMod, mouse:273, resizewindow - - -# For passthrough keyboard into a VM -# bind = $mainMod ALT, P, submap, passthru -#submap = passthru -# to unbind -#bind = $mainMod ALT, P, submap, reset -#submap = reset diff --git a/config/hypr/configs/Settings.conf b/config/hypr/configs/Settings.conf index 7db59116..e9901013 100644 --- a/config/hypr/configs/Settings.conf +++ b/config/hypr/configs/Settings.conf @@ -1,143 +1,7 @@ ## /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ ## +# Default Settings. avoid changing this file as during update, this will be replaced ## refer to Hyprland wiki for more info https://wiki.hyprland.org/Configuring/Variables -# Sourcing colors generated by pywal -source = $HOME/.cache/wal/colors-hyprland -# blurls = waybar -# blurls = rofi -dwindle { - pseudotile = yes - preserve_split = yes - special_scale_factor = 0.8 -} -master { - new_is_master=1 - new_on_top=1 - mfact = 0.5 -} - -general { - sensitivity=1.00 - apply_sens_to_raw=1 - gaps_in = 4 - gaps_out = 8 - border_size = 2 - resize_on_border = true - - col.active_border = $color0 $color2 $color4 $color6 $color8 90deg - col.inactive_border = $backgroundCol - - layout = master -} - -group { - col.border_active = $color15 - - groupbar { - col.active = $color0 - } -} - -decoration { - rounding = 8 - - active_opacity = 1.0 - inactive_opacity = 0.9 - fullscreen_opacity = 1.0 - - dim_inactive = true - dim_strength = 0.1 - - drop_shadow=true - shadow_range=6 - shadow_render_power = 1 - col.shadow = $color2 - col.shadow_inactive = 0x50000000 - - blur { - enabled = true - size = 5 - passes = 2 - ignore_opacity = true - new_optimizations = true - } -} - -animations { - enabled = yes - - bezier = myBezier, 0.05, 0.9, 0.1, 1.05 - bezier = linear, 0.0, 0.0, 1.0, 1.0 - bezier = wind, 0.05, 0.9, 0.1, 1.05 - bezier = winIn, 0.1, 1.1, 0.1, 1.1 - bezier = winOut, 0.3, -0.3, 0, 1 - bezier = slow, 0, 0.85, 0.3, 1 - bezier = overshot, 0.7, 0.6, 0.1, 1.1 - bezier = bounce, 1.1, 1.6, 0.1, 0.85 - bezier = sligshot, 1, -1, 0.15, 1.25 - bezier = nice, 0, 6.9, 0.5, -4.20 - - animation = windowsIn, 1, 5, slow, popin - animation = windowsOut, 1, 5, winOut, popin - animation = windowsMove, 1, 5, wind, slide - animation = border, 1, 10, linear - animation = borderangle, 1, 180, linear, loop - animation = fade, 1, 5, overshot - animation = workspaces, 1, 5, wind - animation = windows, 1, 5, bounce, popin -} - -input { - kb_layout=us - kb_variant= - kb_model= - kb_options=grp:alt_shift_toggle - kb_rules= - repeat_rate=50 - repeat_delay=300 - numlock_by_default=1 - left_handed=0 - follow_mouse=1 - float_switch_override_focus=0 - - touchpad { - disable_while_typing=1 - natural_scroll=0 - clickfinger_behavior=0 - middle_button_emulation=1 - tap-to-click=1 - drag_lock=0 - } -} - -gestures { - workspace_swipe=1 - workspace_swipe_fingers=3 - workspace_swipe_distance=400 - workspace_swipe_invert=1 - workspace_swipe_min_speed_to_force=30 - workspace_swipe_cancel_ratio=0.5 - workspace_swipe_create_new=1 - workspace_swipe_forever=1 -} - -misc { - disable_hyprland_logo = true - disable_splash_rendering = true - mouse_move_enables_dpms = true - #vrr = 0 - enable_swallow = true - no_direct_scanout = true #for fullscreen games - focus_on_activate = false - swallow_regex = ^(kitty)$ - #disable_autoreload = true -} - -binds { - workspace_back_and_forth=1 - allow_workspace_cycles=1 - pass_mouse_when_bound=0 -} diff --git a/config/hypr/hyprland.conf b/config/hypr/hyprland.conf index c09e6f75..4fd65aa4 100644 --- a/config/hypr/hyprland.conf +++ b/config/hypr/hyprland.conf @@ -1,17 +1,23 @@ # Sourcing external config files + +###### Default Configs $configs = $HOME/.config/hypr/configs -source=$configs/ENVariables.conf -source=$configs/Execs.conf source=$configs/Keybinds.conf -source=$configs/Laptops.conf -source=$configs/LaptopDisplay.conf -source=$configs/Monitors.conf -source=$configs/WindowRules.conf source=$configs/Settings.conf +#### User Configs +$UserConfigs = $HOME/.config/hypr/UserConfigs +source= $UserConfigs/Startup_Apps.conf +source= $UserConfigs/ENVariables.conf +source= $UserConfigs/UserKeybinds.conf +source= $UserConfigs/UserSettings.conf +source= $UserConfigs/Monitors.conf +source= $UserConfigs/Laptops.conf +source= $UserConfigs/LaptopDisplay.conf +source= $UserConfigs/WindowRules.conf diff --git a/config/hypr/scripts/QuickEdit.sh b/config/hypr/scripts/QuickEdit.sh index 7e9d67fc..9c7cdffc 100755 --- a/config/hypr/scripts/QuickEdit.sh +++ b/config/hypr/scripts/QuickEdit.sh @@ -1,40 +1,49 @@ #!/bin/bash -hyprDir="$HOME/.config/hypr/configs" +defaultDir="$HOME/.config/hypr/configs" +userDir="$HOME/.config/hypr/UserConfigs" menu(){ printf "1. view Env-variables\n" - printf "2. view Rules\n" - printf "3. view Execs (startup)\n" - printf "4. view KeyBinds\n" + printf "2. view Window-Rules\n" + printf "3. view Startup_Apps\n" + printf "4. view User-Keybinds\n" printf "5. view Monitors\n" printf "6. view Laptop-Keybinds\n" - printf "7. view Hyprland-Settings\n" + printf "7. view User-Settings\n" + printf "8. view Default-Settings\n" + printf "9. view Default-Keybinds\n" } main() { choice=$(menu | rofi -dmenu -config ~/.config/rofi/config-compact.rasi | cut -d. -f1) case $choice in 1) - kitty -e nano "$hyprDir/ENVariables.conf" + kitty -e nano "$userDir/ENVariables.conf" ;; 2) - kitty -e nano "$hyprDir/WindowRules.conf" + kitty -e nano "$userDir/WindowRules.conf" ;; 3) - kitty -e nano "$hyprDir/Execs.conf" + kitty -e nano "$userDir/Startup_Apps.conf" ;; 4) - kitty -e nano "$hyprDir/Keybinds.conf" + kitty -e nano "$userDir/UserKeybinds.conf" ;; 5) - kitty -e nano "$hyprDir/Monitors.conf" + kitty -e nano "$userDir/Monitors.conf" ;; 6) - kitty -e nano "$hyprDir/Laptops.conf" + kitty -e nano "$userDir/Laptops.conf" ;; 7) - kitty -e nano "$hyprDir/Settings.conf" + kitty -e nano "$userDir/UserSettings.conf" + ;; + 8) + kitty -e nano "$defaultDir/Settings.conf" + ;; + 9) + kitty -e nano "$defaultDir/Keybinds.conf" ;; *) ;; diff --git a/config/hypr/scripts/Refresh.sh b/config/hypr/scripts/Refresh.sh index 52f7e642..b5e0f556 100755 --- a/config/hypr/scripts/Refresh.sh +++ b/config/hypr/scripts/Refresh.sh @@ -1,6 +1,16 @@ #!/usr/bin/env bash SCRIPTSDIR=$HOME/.config/hypr/scripts +UserSCRIPTSDIR=$HOME/.config/hypr/UserScripts + +# Define file_exists function +file_exists() { + if [ -e "$1" ]; then + return 0 # File exists + else + return 1 # File does not exist + fi +} # Kill already running processes _ps=(waybar rofi swaync) @@ -18,9 +28,13 @@ waybar & sleep 0.5 swaync > /dev/null 2>&1 & -# Relaunching rainbow borders +# Relaunching rainbow borders if the script exists sleep 1 -${SCRIPTSDIR}/RainbowBorders.sh & +if file_exists "${UserSCRIPTSDIR}/RainbowBorders.sh"; then + ${UserSCRIPTSDIR}/RainbowBorders.sh & +fi # for cava-pywal (note, need to manually restart cava once wallpaper changes) -ln -sf "$HOME/.cache/wal/cava-colors" "$HOME/.config/cava/config" || true
\ No newline at end of file +ln -sf "$HOME/.cache/wal/cava-colors" "$HOME/.config/cava/config" || true + +exit 0
\ No newline at end of file diff --git a/config/hypr/scripts/RefreshNoWaybar.sh b/config/hypr/scripts/RefreshNoWaybar.sh index dc99b623..be06167c 100755 --- a/config/hypr/scripts/RefreshNoWaybar.sh +++ b/config/hypr/scripts/RefreshNoWaybar.sh @@ -5,6 +5,16 @@ # Modified inorder to refresh rofi background, Pywal SCRIPTSDIR=$HOME/.config/hypr/scripts +UserSCRIPTSDIR=$HOME/.config/hypr/UserScripts + +# Define file_exists function +file_exists() { + if [ -e "$1" ]; then + return 0 # File exists + else + return 1 # File does not exist + fi +} # Kill already running processes _ps=(rofi) @@ -17,10 +27,13 @@ done # Pywal refresh ${SCRIPTSDIR}/PywalSwww.sh & - -# Relaunching rainbow borders +# Relaunching rainbow borders if the script exists sleep 1 -${SCRIPTSDIR}/RainbowBorders.sh & +if file_exists "${UserSCRIPTSDIR}/RainbowBorders.sh"; then + ${UserSCRIPTSDIR}/RainbowBorders.sh & +fi # for cava-pywal (note, need to manually restart cava once wallpaper changes) -ln -sf "$HOME/.cache/wal/cava-colors" "$HOME/.config/cava/config" || true
\ No newline at end of file +ln -sf "$HOME/.cache/wal/cava-colors" "$HOME/.config/cava/config" || true + +exit 0
\ No newline at end of file diff --git a/config/rofi/config-compact.rasi b/config/rofi/config-compact.rasi index 308ff85b..b5b45592 100644 --- a/config/rofi/config-compact.rasi +++ b/config/rofi/config-compact.rasi @@ -115,7 +115,7 @@ listview { spacing: 4px; dynamic: true; cycle: true; - scrollbar: false; + scrollbar: true; layout: vertical; reverse: false; fixed-height: true; diff --git a/config/rofi/resolution/1080p/config-compact.rasi b/config/rofi/resolution/1080p/config-compact.rasi index 308ff85b..b5b45592 100644 --- a/config/rofi/resolution/1080p/config-compact.rasi +++ b/config/rofi/resolution/1080p/config-compact.rasi @@ -115,7 +115,7 @@ listview { spacing: 4px; dynamic: true; cycle: true; - scrollbar: false; + scrollbar: true; layout: vertical; reverse: false; fixed-height: true; diff --git a/config/rofi/resolution/1440p/config-compact.rasi b/config/rofi/resolution/1440p/config-compact.rasi index 0dd5fe5d..029fdbdf 100644 --- a/config/rofi/resolution/1440p/config-compact.rasi +++ b/config/rofi/resolution/1440p/config-compact.rasi @@ -115,7 +115,7 @@ listview { spacing: 4px; dynamic: true; cycle: true; - scrollbar: false; + scrollbar: true; layout: vertical; reverse: false; fixed-height: true; @@ -4,6 +4,7 @@ clear wallpaper=$HOME/Pictures/wallpapers/Cute-Cat_ja.jpg +Waybar_Style="$HOME/.config/waybar/style/[Pywal] Chroma Fusion.css" # Check if running as root. If root, script will exit if [[ $EUID -eq 0 ]]; then @@ -36,17 +37,17 @@ xdg-user-dirs-update 2>&1 | tee -a "$LOG" || true # uncommenting WLR_NO_HARDWARE_CURSORS if nvidia is detected if lspci -k | grep -A 2 -E "(VGA|3D)" | grep -iq nvidia; then # NVIDIA GPU detected, uncomment line 23 in ENVariables.conf - sed -i '/env = WLR_NO_HARDWARE_CURSORS,1/s/^#//' config/hypr/configs/ENVariables.conf - sed -i '/env = LIBVA_DRIVER_NAME,nvidia/s/^#//' config/hypr/configs/ENVariables.conf - sed -i '/env = __GLX_VENDOR_LIBRARY_NAME,nvidia/s/^#//' config/hypr/configs/ENVariables.conf + sed -i '/env = WLR_NO_HARDWARE_CURSORS,1/s/^#//' config/hypr/UserConfigs/ENVariables.conf + sed -i '/env = LIBVA_DRIVER_NAME,nvidia/s/^#//' config/hypr/UserConfigs/ENVariables.conf + sed -i '/env = __GLX_VENDOR_LIBRARY_NAME,nvidia/s/^#//' config/hypr/UserConfigs/ENVariables.conf fi # uncommenting WLR_RENDERER_ALLOW_SOFTWARE,1 if running in a VM is detected if hostnamectl | grep -q 'Chassis: vm'; then echo "This script is running in a virtual machine." - sed -i '/env = WLR_NO_HARDWARE_CURSORS,1/s/^#//' config/hypr/configs/ENVariables.conf - sed -i '/env = WLR_RENDERER_ALLOW_SOFTWARE,1/s/^#//' config/hypr/configs/ENVariables.conf - sed -i '/monitor = Virtual-1, 1920x1080@60,auto,1/s/^#//' config/hypr/configs/Monitors.conf + sed -i '/env = WLR_NO_HARDWARE_CURSORS,1/s/^#//' config/hypr/UserConfigs/ENVariables.conf + sed -i '/env = WLR_RENDERER_ALLOW_SOFTWARE,1/s/^#//' config/hypr/UserConfigs/ENVariables.conf + sed -i '/monitor = Virtual-1, 1920x1080@60,auto,1/s/^#//' config/hypr/UserConfigs/Monitors.conf fi # Preparing hyprland.conf to check for current keyboard layout @@ -98,8 +99,8 @@ while true; do case $confirm in [yY]) # If the detected layout is correct, update the 'kb_layout=' line in the file - awk -v layout="$layout" '/kb_layout/ {$0 = " kb_layout=" layout} 1' config/hypr/configs/Settings.conf > temp.conf - mv temp.conf config/hypr/configs/Settings.conf + awk -v layout="$layout" '/kb_layout/ {$0 = " kb_layout=" layout} 1' config/hypr/UserConfigs/Settings.conf > temp.conf + mv temp.conf config/hypr/UserConfigs/Settings.conf break ;; [nN]) printf "\n%.0s" {1..2} @@ -111,8 +112,8 @@ while true; do printf "\n%.0s" {1..2} read -p "${CAT} - Please enter the correct keyboard layout: " new_layout # Update the 'kb_layout=' line with the correct layout in the file - awk -v new_layout="$new_layout" '/kb_layout/ {$0 = " kb_layout=" new_layout} 1' config/hypr/configs/Settings.conf > temp.conf - mv temp.conf config/hypr/configs/Settings.conf + awk -v new_layout="$new_layout" '/kb_layout/ {$0 = " kb_layout=" new_layout} 1' config/hypr/UserConfigs/Settings.conf > temp.conf + mv temp.conf config/hypr/UserConfigs/Settings.conf break ;; *) echo "Please enter either 'y' or 'n'." ;; @@ -166,7 +167,7 @@ get_backup_dirname() { echo "back-up_${timestamp}" } -for DIR in btop cava hypr kitty Kvantum qt5ct qt6ct rofi swappy swaylock wal waybar wlogout; do +for DIR in btop cava hypr kitty Kvantum qt5ct qt6ct rofi swappy swaync swaylock wal waybar wlogout; do DIRPATH=~/.config/"$DIR" if [ -d "$DIRPATH" ]; then echo -e "${NOTE} - Config for $DIR found, attempting to back up." @@ -198,7 +199,7 @@ cp -r wallpapers ~/Pictures/ && { echo "${OK}Copy completed!"; } || { echo "${ER # Set some files as executable chmod +x ~/.config/hypr/scripts/* 2>&1 | tee -a "$LOG" - +chmod +x ~/.config/hypr/UserScripts/* 2>&1 | tee -a "$LOG" # Set executable for initial-boot.sh chmod +x ~/.config/hypr/initial-boot.sh 2>&1 | tee -a "$LOG" @@ -252,7 +253,7 @@ else fi # symlinks for waybar style -ln -sf "$HOME/.config/waybar/style/[Pywal] Chroma Fusion.css" "$HOME/.config/waybar/style.css" && \ +ln -sf $Waybar_Style "$HOME/.config/waybar/style.css" && \ # initialize pywal to avoid config error on hyprland wal -i $wallpaper -s -t 2>&1 | tee -a "$LOG" |