updated keybinds and updated laptop.conf

1 files changed, 17 insertions, 11 deletions

diff --git a/config/hypr/configs/Laptops.conf b/config/hypr/configs/Laptops.conf
index 24eef9af..58cdccde 100644
--- a/config/hypr/configs/Laptops.conf
+++ b/config/hypr/configs/Laptops.conf
@@ -14,14 +14,14 @@ $LidSwitch = $scriptsDir/LidSwitch.sh
 $screenshot = $scriptsDir/ScreenShot.sh
 $touchpad = $scriptsDir/TouchPad.sh
 
-bind = , xf86KbdBrightnessDown, exec, $kbacklight --dec #FN+F2 Keyboard brightness Down
-bind = , xf86KbdBrightnessUp, exec, $kbacklight --inc #FN+F3 Keyboard brightnes up
+bind = , xf86KbdBrightnessDown, exec, $kbacklight --dec #Keyboard brightness Down
+bind = , xf86KbdBrightnessUp, exec, $kbacklight --inc #Keyboard brightness up
 bind = , xf86Launch1, exec, rog-control-center # ASUS Armory crate button
 bind = , xf86Launch3, exec, asusctl led-mode -n #FN+F4 Switch keyboard RGB profile 
 bind = , xf86Launch4, exec, asusctl profile -n  #FN+F5 change of fan profiles (Quite, Balance, Performance)
-bind = , xf86MonBrightnessDown, exec, $backlight --dec #FN+F7
-bind = , xf86MonBrightnessUp, exec, $backlight --inc #FN+F8
-bind = , xf86TouchpadToggle, exec, $touchpad #FN+10 disable touchpad
+bind = , xf86MonBrightnessDown, exec, $backlight --dec 
+bind = , xf86MonBrightnessUp, exec, $backlight --inc 
+bind = , xf86TouchpadToggle, exec, $touchpad #disable touchpad
 
 # Screenshot keybindings for Asus G15 (no PrinSrc button)
 bind = $mainMod, F6, exec, $screenshot --now
@@ -29,19 +29,25 @@ bind = $mainMod SHIFT, F6, exec, $screenshot --area
 bind = $mainMod CTRL SHIFT, F6, exec, $screenshot --in5
 bind = $mainMod ALT, F6, exec, $screenshot --in10
 
+# Below are useful when you are connecting your laptop in external display
+# Suggest you edit below for your laptop display
 # From WIKI This is to disable laptop monitor when lid is closed.
 # consult https://wiki.hyprland.org/hyprland-wiki/pages/Configuring/Binds/#switches
 bindl = , switch:off:Lid Switch,exec,hyprctl keyword monitor "eDP-1, preferred, auto, 1"
 bindl = , switch:on:Lid Switch,exec,hyprctl keyword monitor "eDP-1, disable"
 
-
-# Be very careful and read the notes when using this part
-# Before enabling this part, make sure to comment out (put # on both of the bindl = , switch.... above)
+#############################################################################
+### WARNING! Using this method has some caveats!! USE THIS PART WITH SOME CAUTION!
+# CONS of doing this, is that you need to set up your wallpaper (SUPER W) and choose wallpaper.
+# CAVEATS! Sometimes the Main Laptop Monitor DOES NOT have display that it needs to re-connect your external monitor
+# One work around is to ensure that before shutting down laptop, MAKE SURE your laptop lid is OPEN!!
+# Make sure to comment (put # on the both the bindl = , switch ......) above
 # NOTE: Display for laptop are being generated into LaptopDisplay.conf
-# CONS of doing this, is that there is no wallpaper. you need to set up your wallpaper again by (SUPER W) and set wallpaper.
+# This part is to be use if you do not want your main laptop monitor to wake up during say wallpaper change etc
 
 #bindl = , switch:off:Lid Switch,exec,echo "monitor = eDP-1, preferred, auto, 1" > $configs/LaptopDisplay.conf
 #bindl = , switch:on:Lid Switch,exec,echo "monitor = eDP-1, disable" > $configs/LaptopDisplay.conf
 
-# for laptop-lid action (to erase the last entry) - Very important to uncomment this if you use above
-# exec-once = echo "eDP-1, preferred, auto, 1" > $HOME/.config/hypr/configs/LaptopDisplay.conf
+# for laptop-lid action (to erase the last entry)
+#exec-once = echo "eDP-1, preferred, auto, 1" > $HOME/.config/hypr/configs/LaptopDisplay.conf
+##############################################################################