Merge remote-tracking branch 'upstream'

35 files changed, 571 insertions, 54 deletions

diff --git a/config/hypr/animations/00-default.conf b/config/hypr/animations/00-default.conf
index f2d33d93..41ca0efb 100644
--- a/config/hypr/animations/00-default.conf
+++ b/config/hypr/animations/00-default.conf
@@ -3,13 +3,13 @@
 animations {
   enabled = yes
 
-  bezier = wind, 0.05, 0.9, 0.1, 1.05
-  bezier = winIn, 0.1, 1.1, 0.1, 1.1
-  bezier = winOut, 0.3, -0.3, 0, 1
+  bezier = wind, 0.05, 0.9, 0.1, 1.00
+  bezier = winIn, 0.1, 1.0, 0.1, 1.0
+  bezier = winOut, 0.3, 0.0, 0, 1
   bezier = liner, 1, 1, 1, 1
-  bezier = overshot, 0.05, 0.9, 0.1, 1.05
+  bezier = overshot, 0.05, 0.9, 0.1, 1.00
   bezier = smoothOut, 0.5, 0, 0.99, 0.99
-  bezier = smoothIn, 0.5, -0.5, 0.68, 1.5
+  bezier = smoothIn, 0.5, 0.0, 0.68, 1.0
   
   animation = windows, 1, 6, wind, slide
   animation = windowsIn, 1, 5, winIn, slide
@@ -23,4 +23,4 @@ animations {
   # animations for -git or version >0.42.0
   animation = workspacesIn, 1, 5, winIn, slide
   animation = workspacesOut, 1, 5, winOut, slide
-}
\ No newline at end of file
+}
diff --git a/config/hypr/animations/00-default.lua b/config/hypr/animations/00-default.lua
new file mode 100644
index 00000000..d28ba5a1
--- /dev/null
+++ b/config/hypr/animations/00-default.lua
@@ -0,0 +1,26 @@
+-- Auto-generated from 00-default.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("smoothOut", { type = "bezier", points = { { 0.5, 0 }, { 0.99, 0.99 } } })
+hl.curve("smoothIn", { type = "bezier", points = { { 0.5, 0.0 }, { 0.68, 1.0 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 5, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 3, bezier = "smoothOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 180, bezier = "liner", style = "loop" })
+hl.animation({ leaf = "fade", enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "overshot" })
+hl.animation({ leaf = "workspacesIn", enabled = true, speed = 5, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "workspacesOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
diff --git a/config/hypr/animations/01-default - v2.conf b/config/hypr/animations/01-default - v2.conf
index 7ba66b79..018e375e 100644
--- a/config/hypr/animations/01-default - v2.conf
+++ b/config/hypr/animations/01-default - v2.conf
@@ -5,16 +5,16 @@
 animations {
   enabled = yes
 
-  bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+  bezier = myBezier, 0.05, 0.9, 0.1, 1.00
   bezier = linear, 0.0, 0.0, 1.0, 1.0
-  bezier = wind, 0.05, 0.9, 0.1, 1.05
-  bezier = winIn, 0.1, 1.1, 0.1, 1.1
-  bezier = winOut, 0.3, -0.3, 0, 1
+  bezier = wind, 0.05, 0.9, 0.1, 1.00
+  bezier = winIn, 0.1, 1.0, 0.1, 1.0
+  bezier = winOut, 0.3, 0.0, 0, 1
   bezier = slow, 0, 0.85, 0.3, 1
-  bezier = overshot, 0.7, 0.6, 0.1, 1.1
-  bezier = bounce, 1.1, 1.6, 0.1, 0.85
-  bezier = sligshot, 1, -1, 0.15, 1.25
-  bezier = nice, 0, 6.9, 0.5, -4.20
+  bezier = overshot, 0.7, 0.6, 0.1, 1.0
+  bezier = bounce, 1.0, 1.0, 0.1, 0.85
+  bezier = sligshot, 1, 0.0, 0.15, 1.00
+  bezier = nice, 0, 1.0, 0.5, 0.00
   
   animation = windowsIn, 1, 5, slow, popin
   animation = windowsOut, 1, 5, winOut, popin
@@ -24,4 +24,4 @@ animations {
   animation = fade, 1, 5, overshot
   animation = workspaces, 1, 5, wind
   animation = windows, 1, 5, bounce, popin
-}
\ No newline at end of file
+}
diff --git a/config/hypr/animations/01-default - v2.lua b/config/hypr/animations/01-default - v2.lua
new file mode 100644
index 00000000..af12ecfe
--- /dev/null
+++ b/config/hypr/animations/01-default - v2.lua
@@ -0,0 +1,27 @@
+-- Auto-generated from 01-default - v2.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("linear", { type = "bezier", points = { { 0.0, 0.0 }, { 1.0, 1.0 } } })
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("slow", { type = "bezier", points = { { 0, 0.85 }, { 0.3, 1 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.7, 0.6 }, { 0.1, 1.0 } } })
+hl.curve("bounce", { type = "bezier", points = { { 1.0, 1.0 }, { 0.1, 0.85 } } })
+hl.curve("sligshot", { type = "bezier", points = { { 1, 0.0 }, { 0.15, 1.00 } } })
+hl.curve("nice", { type = "bezier", points = { { 0, 1.0 }, { 0.5, 0.00 } } })
+
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 5, bezier = "slow", style = "popin" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "popin" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "linear" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 180, bezier = "linear", style = "loop" })
+hl.animation({ leaf = "fade", enabled = true, speed = 5, bezier = "overshot" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
+hl.animation({ leaf = "windows", enabled = true, speed = 5, bezier = "bounce", style = "popin" })
diff --git a/config/hypr/animations/03- Disable Animation.lua b/config/hypr/animations/03- Disable Animation.lua
new file mode 100644
index 00000000..80f4be52
--- /dev/null
+++ b/config/hypr/animations/03- Disable Animation.lua
@@ -0,0 +1,7 @@
+-- Auto-generated from 03- Disable Animation.conf
+
+hl.config({
+  animations = {
+    enabled = false,
+  },
+})
diff --git a/config/hypr/animations/END-4.conf b/config/hypr/animations/END-4.conf
index 394a0a1a..fc3369e2 100644
--- a/config/hypr/animations/END-4.conf
+++ b/config/hypr/animations/END-4.conf
@@ -11,8 +11,8 @@ animations {
     bezier = md3_standard, 0.2, 0, 0, 1
     bezier = md3_decel, 0.05, 0.7, 0.1, 1
     bezier = md3_accel, 0.3, 0, 0.8, 0.15
-    bezier = overshot, 0.05, 0.9, 0.1, 1.1
-    bezier = crazyshot, 0.1, 1.5, 0.76, 0.92 
+    bezier = overshot, 0.05, 0.9, 0.1, 1.0
+    bezier = crazyshot, 0.1, 1.0, 0.76, 0.92 
     bezier = hyprnostretch, 0.05, 0.9, 0.1, 1.0
     bezier = menu_decel, 0.1, 1, 0, 1
     bezier = menu_accel, 0.38, 0.04, 1, 0.07
@@ -20,7 +20,7 @@ animations {
     bezier = easeOutCirc, 0, 0.55, 0.45, 1
     bezier = easeOutExpo, 0.16, 1, 0.3, 1
     bezier = softAcDecel, 0.26, 0.26, 0.15, 1
-    bezier = md2, 0.4, 0, 0.2, 1 # use with .2s duration
+    bezier = md2, 0.4, 0, 0.2, 1  # use with .2s duration
     # Animation configs
     animation = windows, 1, 3, md3_decel, popin 60%
     animation = windowsIn, 1, 3, md3_decel, popin 60%
diff --git a/config/hypr/animations/END-4.lua b/config/hypr/animations/END-4.lua
new file mode 100644
index 00000000..1cc5ded9
--- /dev/null
+++ b/config/hypr/animations/END-4.lua
@@ -0,0 +1,34 @@
+-- Auto-generated from END-4.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("linear", { type = "bezier", points = { { 0, 0 }, { 1, 1 } } })
+hl.curve("md3_standard", { type = "bezier", points = { { 0.2, 0 }, { 0, 1 } } })
+hl.curve("md3_decel", { type = "bezier", points = { { 0.05, 0.7 }, { 0.1, 1 } } })
+hl.curve("md3_accel", { type = "bezier", points = { { 0.3, 0 }, { 0.8, 0.15 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+hl.curve("crazyshot", { type = "bezier", points = { { 0.1, 1.0 }, { 0.76, 0.92 } } })
+hl.curve("hyprnostretch", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+hl.curve("menu_decel", { type = "bezier", points = { { 0.1, 1 }, { 0, 1 } } })
+hl.curve("menu_accel", { type = "bezier", points = { { 0.38, 0.04 }, { 1, 0.07 } } })
+hl.curve("easeInOutCirc", { type = "bezier", points = { { 0.85, 0 }, { 0.15, 1 } } })
+hl.curve("easeOutCirc", { type = "bezier", points = { { 0, 0.55 }, { 0.45, 1 } } })
+hl.curve("easeOutExpo", { type = "bezier", points = { { 0.16, 1 }, { 0.3, 1 } } })
+hl.curve("softAcDecel", { type = "bezier", points = { { 0.26, 0.26 }, { 0.15, 1 } } })
+hl.curve("md2", { type = "bezier", points = { { 0.4, 0 }, { 0.2, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 3, bezier = "md3_accel", style = "popin 60%" })
+hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 3, bezier = "md3_decel" })
+hl.animation({ leaf = "layersIn", enabled = true, speed = 3, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "layersOut", enabled = true, speed = 1.6, bezier = "menu_accel" })
+hl.animation({ leaf = "fadeLayersIn", enabled = true, speed = 2, bezier = "menu_decel" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 4.5, bezier = "menu_accel" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 7, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidevert" })
diff --git a/config/hypr/animations/HYDE - Vertical.lua b/config/hypr/animations/HYDE - Vertical.lua
new file mode 100644
index 00000000..e8d64192
--- /dev/null
+++ b/config/hypr/animations/HYDE - Vertical.lua
@@ -0,0 +1,22 @@
+-- Auto-generated from HYDE - Vertical.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("fluent_decel", { type = "bezier", points = { { 0, 0.2 }, { 0.4, 1 } } })
+hl.curve("easeOutCirc", { type = "bezier", points = { { 0, 0.55 }, { 0.45, 1 } } })
+hl.curve("easeOutCubic", { type = "bezier", points = { { 0.33, 1 }, { 0.68, 1 } } })
+hl.curve("easeinoutsine", { type = "bezier", points = { { 0.37, 0 }, { 0.63, 1 } } })
+
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 1.5, bezier = "easeinoutsine", style = "popin 60%" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 1.5, bezier = "easeOutCubic", style = "popin 60%" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 1.5, bezier = "easeinoutsine", style = "slide" })
+hl.animation({ leaf = "fade", enabled = true, speed = 2.5, bezier = "fluent_decel" })
+hl.animation({ leaf = "fadeLayersIn", enabled = false })
+hl.animation({ leaf = "border", enabled = false })
+hl.animation({ leaf = "layers", enabled = true, speed = 1.5, bezier = "easeinoutsine", style = "popin" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 3, bezier = "fluent_decel", style = "slidefadevert 30%" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 2, bezier = "fluent_decel", style = "slidefade 10%" })
diff --git a/config/hypr/animations/HYDE - default.conf b/config/hypr/animations/HYDE - default.conf
index 981414fd..51c20a5b 100644
--- a/config/hypr/animations/HYDE - default.conf
+++ b/config/hypr/animations/HYDE - default.conf
@@ -5,9 +5,9 @@
 
 animations {
     enabled = yes
-    bezier = wind, 0.05, 0.9, 0.1, 1.05
-    bezier = winIn, 0.1, 1.1, 0.1, 1.1
-    bezier = winOut, 0.3, -0.3, 0, 1
+    bezier = wind, 0.05, 0.9, 0.1, 1.00
+    bezier = winIn, 0.1, 1.0, 0.1, 1.0
+    bezier = winOut, 0.3, 0.0, 0, 1
     bezier = liner, 1, 1, 1, 1
     animation = windows, 1, 6, wind, slide
     animation = windowsIn, 1, 6, winIn, slide
diff --git a/config/hypr/animations/HYDE - default.lua b/config/hypr/animations/HYDE - default.lua
new file mode 100644
index 00000000..9bcbad6d
--- /dev/null
+++ b/config/hypr/animations/HYDE - default.lua
@@ -0,0 +1,22 @@
+-- Auto-generated from HYDE - default.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 6, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "fade", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 5, bezier = "wind", style = "slidevert" })
diff --git a/config/hypr/animations/HYDE - minimal-1.conf b/config/hypr/animations/HYDE - minimal-1.conf
index 909f7140..81264f3a 100644
--- a/config/hypr/animations/HYDE - minimal-1.conf
+++ b/config/hypr/animations/HYDE - minimal-1.conf
@@ -8,9 +8,9 @@ animations {
 
   # █▄▄ █▀▀ ▀█ █ █▀▀ █▀█   █▀▀ █░█ █▀█ █░█ █▀▀
   # █▄█ ██▄ █▄ █ ██▄ █▀▄   █▄▄ █▄█ █▀▄ ▀▄▀ ██▄
-  bezier = wind, 0.05, 0.9, 0.1, 1.05
-  bezier = winIn, 0.1, 1.1, 0.1, 1.1
-  bezier = winOut, 0.3, -0.3, 0, 1
+  bezier = wind, 0.05, 0.9, 0.1, 1.00
+  bezier = winIn, 0.1, 1.0, 0.1, 1.0
+  bezier = winOut, 0.3, 0.0, 0, 1
   bezier = liner, 1, 1, 1, 1
 
   
diff --git a/config/hypr/animations/HYDE - minimal-1.lua b/config/hypr/animations/HYDE - minimal-1.lua
new file mode 100644
index 00000000..53530f57
--- /dev/null
+++ b/config/hypr/animations/HYDE - minimal-1.lua
@@ -0,0 +1,21 @@
+-- Auto-generated from HYDE - minimal-1.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 6, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "fade", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
diff --git a/config/hypr/animations/HYDE - minimal-2.lua b/config/hypr/animations/HYDE - minimal-2.lua
new file mode 100644
index 00000000..0e4f45c8
--- /dev/null
+++ b/config/hypr/animations/HYDE - minimal-2.lua
@@ -0,0 +1,15 @@
+-- Auto-generated from HYDE - minimal-2.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("quart", { type = "bezier", points = { { 0.25, 1 }, { 0.5, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "quart", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 6, bezier = "quart" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 6, bezier = "quart" })
+hl.animation({ leaf = "fade", enabled = true, speed = 6, bezier = "quart" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 6, bezier = "quart" })
diff --git a/config/hypr/animations/HYDE - optimized.conf b/config/hypr/animations/HYDE - optimized.conf
index e325b635..911ca41b 100644
--- a/config/hypr/animations/HYDE - optimized.conf
+++ b/config/hypr/animations/HYDE - optimized.conf
@@ -7,13 +7,13 @@ animations {
     enabled = true
     bezier = wind, 0.05, 0.85, 0.03, 0.97
     bezier = winIn, 0.07, 0.88, 0.04, 0.99
-    bezier = winOut, 0.20, -0.15, 0, 1
+    bezier = winOut, 0.20, 0.00, 0, 1
     bezier = liner, 1, 1, 1, 1
     bezier = md3_standard, 0.12, 0, 0, 1
     bezier = md3_decel, 0.05, 0.80, 0.10, 0.97
     bezier = md3_accel, 0.20, 0, 0.80, 0.08
-    bezier = overshot, 0.05, 0.85, 0.07, 1.04
-    bezier = crazyshot, 0.1, 1.22, 0.68, 0.98
+    bezier = overshot, 0.05, 0.85, 0.07, 1.00
+    bezier = crazyshot, 0.1, 1.00, 0.68, 0.98
     bezier = hyprnostretch, 0.05, 0.82, 0.03, 0.94
     bezier = menu_decel, 0.05, 0.82, 0, 1
     bezier = menu_accel, 0.20, 0, 0.82, 0.10
@@ -21,9 +21,10 @@ animations {
     bezier = easeOutCirc, 0, 0.48, 0.38, 1
     bezier = easeOutExpo, 0.10, 0.94, 0.23, 0.98
     bezier = softAcDecel, 0.20, 0.20, 0.15, 1
-    bezier = md2, 0.30, 0, 0.15, 1
+    bezier = md1, 0.30, 0, 0.15, 1
+    bezier = md3_decel, 0.05, 0.80, 0.10, 0.97
     
-    bezier = OutBack, 0.28, 1.40, 0.58, 1
+    bezier = OutBack, 0.28, 1.00, 0.58, 1
     bezier = easeInOutCirc, 0.78, 0, 0.15, 1
 
     animation = border, 1, 1.6, liner
diff --git a/config/hypr/animations/HYDE - optimized.lua b/config/hypr/animations/HYDE - optimized.lua
new file mode 100644
index 00000000..7e48ca86
--- /dev/null
+++ b/config/hypr/animations/HYDE - optimized.lua
@@ -0,0 +1,40 @@
+-- Auto-generated from HYDE - optimized.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.85 }, { 0.03, 0.97 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.07, 0.88 }, { 0.04, 0.99 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.20, 0.00 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+hl.curve("md3_standard", { type = "bezier", points = { { 0.12, 0 }, { 0, 1 } } })
+hl.curve("md3_decel", { type = "bezier", points = { { 0.05, 0.80 }, { 0.10, 0.97 } } })
+hl.curve("md3_accel", { type = "bezier", points = { { 0.20, 0 }, { 0.80, 0.08 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.85 }, { 0.07, 1.00 } } })
+hl.curve("crazyshot", { type = "bezier", points = { { 0.1, 1.00 }, { 0.68, 0.98 } } })
+hl.curve("hyprnostretch", { type = "bezier", points = { { 0.05, 0.82 }, { 0.03, 0.94 } } })
+hl.curve("menu_decel", { type = "bezier", points = { { 0.05, 0.82 }, { 0, 1 } } })
+hl.curve("menu_accel", { type = "bezier", points = { { 0.20, 0 }, { 0.82, 0.10 } } })
+hl.curve("easeInOutCirc", { type = "bezier", points = { { 0.75, 0 }, { 0.15, 1 } } })
+hl.curve("easeOutCirc", { type = "bezier", points = { { 0, 0.48 }, { 0.38, 1 } } })
+hl.curve("easeOutExpo", { type = "bezier", points = { { 0.10, 0.94 }, { 0.23, 0.98 } } })
+hl.curve("softAcDecel", { type = "bezier", points = { { 0.20, 0.20 }, { 0.15, 1 } } })
+hl.curve("md2", { type = "bezier", points = { { 0.30, 0 }, { 0.15, 1 } } })
+hl.curve("OutBack", { type = "bezier", points = { { 0.28, 1.00 }, { 0.58, 1 } } })
+hl.curve("easeInOutCirc", { type = "bezier", points = { { 0.78, 0 }, { 0.15, 1 } } })
+
+hl.animation({ leaf = "border", enabled = true, speed = 1.6, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 82, bezier = "liner", style = "once" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 3.2, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 2.8, bezier = "easeOutCirc" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 3.0, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "fade", enabled = true, speed = 1.8, bezier = "md3_decel" })
+hl.animation({ leaf = "layersIn", enabled = true, speed = 1.8, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "layersOut", enabled = true, speed = 1.5, bezier = "menu_accel" })
+hl.animation({ leaf = "fadeLayersIn", enabled = true, speed = 1.6, bezier = "menu_decel" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 1.8, bezier = "menu_accel" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 4.0, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 2.3, bezier = "md3_decel", style = "slidefadevert 15%" })
diff --git a/config/hypr/animations/ML4W - classic.conf b/config/hypr/animations/ML4W - classic.conf
index 7f697afd..77f32290 100644
--- a/config/hypr/animations/ML4W - classic.conf
+++ b/config/hypr/animations/ML4W - classic.conf
@@ -5,7 +5,7 @@
 
 animations {
     enabled = true
-    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+    bezier = myBezier, 0.05, 0.9, 0.1, 1.00
     animation = windows, 1, 7, myBezier
     animation = windowsOut, 1, 7, default, popin 80%
     animation = border, 1, 10, default
diff --git a/config/hypr/animations/ML4W - classic.lua b/config/hypr/animations/ML4W - classic.lua
new file mode 100644
index 00000000..a77e4334
--- /dev/null
+++ b/config/hypr/animations/ML4W - classic.lua
@@ -0,0 +1,16 @@
+-- Auto-generated from ML4W - classic.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 7, bezier = "myBezier" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 7, bezier = "default", style = "popin 80%" })
+hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 8, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 7, bezier = "default" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 6, bezier = "default" })
diff --git a/config/hypr/animations/ML4W - dynamic.conf b/config/hypr/animations/ML4W - dynamic.conf
index 7c98675d..a2d65eaf 100644
--- a/config/hypr/animations/ML4W - dynamic.conf
+++ b/config/hypr/animations/ML4W - dynamic.conf
@@ -5,9 +5,9 @@
 
 animations {
     enabled = true
-    bezier = wind, 0.05, 0.9, 0.1, 1.05
-    bezier = winIn, 0.1, 1.1, 0.1, 1.1
-    bezier = winOut, 0.3, -0.3, 0, 1
+    bezier = wind, 0.05, 0.9, 0.1, 1.00
+    bezier = winIn, 0.1, 1.0, 0.1, 1.0
+    bezier = winOut, 0.3, 0.0, 0, 1
     bezier = liner, 1, 1, 1, 1
     animation = windows, 1, 6, wind, slide
     animation = windowsIn, 1, 6, winIn, slide
diff --git a/config/hypr/animations/ML4W - dynamic.lua b/config/hypr/animations/ML4W - dynamic.lua
new file mode 100644
index 00000000..fbb86797
--- /dev/null
+++ b/config/hypr/animations/ML4W - dynamic.lua
@@ -0,0 +1,21 @@
+-- Auto-generated from ML4W - dynamic.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 6, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "loop" })
+hl.animation({ leaf = "fade", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
diff --git a/config/hypr/animations/ML4W - fast.conf b/config/hypr/animations/ML4W - fast.conf
index ce586478..fd9d22d8 100644
--- a/config/hypr/animations/ML4W - fast.conf
+++ b/config/hypr/animations/ML4W - fast.conf
@@ -9,16 +9,17 @@ animations {
     bezier = md3_standard, 0.2, 0, 0, 1
     bezier = md3_decel, 0.05, 0.7, 0.1, 1
     bezier = md3_accel, 0.3, 0, 0.8, 0.15
-    bezier = overshot, 0.05, 0.9, 0.1, 1.1
-    bezier = crazyshot, 0.1, 1.5, 0.76, 0.92 
+    bezier = overshot, 0.05, 0.9, 0.1, 1.0
+    bezier = crazyshot, 0.1, 1.0, 0.76, 0.92 
     bezier = hyprnostretch, 0.05, 0.9, 0.1, 1.0
     bezier = fluent_decel, 0.1, 1, 0, 1
     bezier = easeInOutCirc, 0.85, 0, 0.15, 1
     bezier = easeOutCirc, 0, 0.55, 0.45, 1
     bezier = easeOutExpo, 0.16, 1, 0.3, 1
+    bezier = md3_decel, 0.05, 0.7, 0.1, 1
     animation = windows, 1, 3, md3_decel, popin 60%
     animation = border, 1, 10, default
     animation = fade, 1, 2.5, md3_decel
     animation = workspaces, 1, 3.5, easeOutExpo, slide
     animation = specialWorkspace, 1, 3, md3_decel, slidevert
-}
\ No newline at end of file
+}
diff --git a/config/hypr/animations/ML4W - fast.lua b/config/hypr/animations/ML4W - fast.lua
new file mode 100644
index 00000000..f8560c89
--- /dev/null
+++ b/config/hypr/animations/ML4W - fast.lua
@@ -0,0 +1,25 @@
+-- Auto-generated from ML4W - fast.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("linear", { type = "bezier", points = { { 0, 0 }, { 1, 1 } } })
+hl.curve("md3_standard", { type = "bezier", points = { { 0.2, 0 }, { 0, 1 } } })
+hl.curve("md3_decel", { type = "bezier", points = { { 0.05, 0.7 }, { 0.1, 1 } } })
+hl.curve("md3_accel", { type = "bezier", points = { { 0.3, 0 }, { 0.8, 0.15 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+hl.curve("crazyshot", { type = "bezier", points = { { 0.1, 1.0 }, { 0.76, 0.92 } } })
+hl.curve("hyprnostretch", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+hl.curve("fluent_decel", { type = "bezier", points = { { 0.1, 1 }, { 0, 1 } } })
+hl.curve("easeInOutCirc", { type = "bezier", points = { { 0.85, 0 }, { 0.15, 1 } } })
+hl.curve("easeOutCirc", { type = "bezier", points = { { 0, 0.55 }, { 0.45, 1 } } })
+hl.curve("easeOutExpo", { type = "bezier", points = { { 0.16, 1 }, { 0.3, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 2.5, bezier = "md3_decel" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 3.5, bezier = "easeOutExpo", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidevert" })
diff --git a/config/hypr/animations/ML4W - high.conf b/config/hypr/animations/ML4W - high.conf
index bc38fc66..b5fdba08 100644
--- a/config/hypr/animations/ML4W - high.conf
+++ b/config/hypr/animations/ML4W - high.conf
@@ -5,9 +5,9 @@
 
 animations {
     enabled = true
-    bezier = wind, 0.05, 0.9, 0.1, 1.05
-    bezier = winIn, 0.1, 1.1, 0.1, 1.1
-    bezier = winOut, 0.3, -0.3, 0, 1
+    bezier = wind, 0.05, 0.9, 0.1, 1.00
+    bezier = winIn, 0.1, 1.0, 0.1, 1.0
+    bezier = winOut, 0.3, 0.0, 0, 1
     bezier = liner, 1, 1, 1, 1
     animation = windows, 1, 6, wind, slide
     animation = windowsIn, 1, 6, winIn, slide
diff --git a/config/hypr/animations/ML4W - high.lua b/config/hypr/animations/ML4W - high.lua
new file mode 100644
index 00000000..8b379167
--- /dev/null
+++ b/config/hypr/animations/ML4W - high.lua
@@ -0,0 +1,21 @@
+-- Auto-generated from ML4W - high.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 6, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "fade", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
diff --git a/config/hypr/animations/ML4W - moving.conf b/config/hypr/animations/ML4W - moving.conf
index deb6ad32..fda1e376 100644
--- a/config/hypr/animations/ML4W - moving.conf
+++ b/config/hypr/animations/ML4W - moving.conf
@@ -6,9 +6,9 @@
 
 animations {
     enabled = true
-    bezier = overshot, 0.05, 0.9, 0.1, 1.05
+    bezier = overshot, 0.05, 0.9, 0.1, 1.00
     bezier = smoothOut, 0.5, 0, 0.99, 0.99
-    bezier = smoothIn, 0.5, -0.5, 0.68, 1.5
+    bezier = smoothIn, 0.5, 0.0, 0.68, 1.0
     animation = windows, 1, 5, overshot, slide
     animation = windowsOut, 1, 3, smoothOut
     animation = windowsIn, 1, 3, smoothOut
diff --git a/config/hypr/animations/ML4W - moving.lua b/config/hypr/animations/ML4W - moving.lua
new file mode 100644
index 00000000..e00b6328
--- /dev/null
+++ b/config/hypr/animations/ML4W - moving.lua
@@ -0,0 +1,20 @@
+-- Auto-generated from ML4W - moving.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("smoothOut", { type = "bezier", points = { { 0.5, 0 }, { 0.99, 0.99 } } })
+hl.curve("smoothIn", { type = "bezier", points = { { 0.5, 0.0 }, { 0.68, 1.0 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 5, bezier = "overshot", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 4, bezier = "smoothIn", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 5, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 5, bezier = "smoothIn" })
+hl.animation({ leaf = "fadeDim", enabled = true, speed = 5, bezier = "smoothIn" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 6, bezier = "default" })
diff --git a/config/hypr/animations/ML4W - standard.conf b/config/hypr/animations/ML4W - standard.conf
index 7a18c604..57844bd8 100644
--- a/config/hypr/animations/ML4W - standard.conf
+++ b/config/hypr/animations/ML4W - standard.conf
@@ -5,7 +5,7 @@
 
 animations {
     enabled = true
-    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+    bezier = myBezier, 0.05, 0.9, 0.1, 1.00
     animation = windows, 1, 7, myBezier
     animation = windowsOut, 1, 7, default, popin 80%
     animation = border, 1, 10, default
diff --git a/config/hypr/animations/ML4W - standard.lua b/config/hypr/animations/ML4W - standard.lua
new file mode 100644
index 00000000..acff701b
--- /dev/null
+++ b/config/hypr/animations/ML4W - standard.lua
@@ -0,0 +1,16 @@
+-- Auto-generated from ML4W - standard.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 7, bezier = "myBezier" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 7, bezier = "default", style = "popin 80%" })
+hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 8, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 7, bezier = "default" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 6, bezier = "default" })
diff --git a/config/hypr/animations/Mahaveer - me-1.conf b/config/hypr/animations/Mahaveer - me-1.conf
index 8db554b0..39b16e70 100644
--- a/config/hypr/animations/Mahaveer - me-1.conf
+++ b/config/hypr/animations/Mahaveer - me-1.conf
@@ -6,16 +6,16 @@
 animations {
     enabled = true
     # Animation curves
-    bezier = wind, 0.05, 0.9, 0.1, 1.05
-    bezier = winIn, 0.1, 1.1, 0.1, 1.1
-    bezier = winOut, 0.3, -0.3, 0, 1
+    bezier = wind, 0.05, 0.9, 0.1, 1.00
+    bezier = winIn, 0.1, 1.0, 0.1, 1.0
+    bezier = winOut, 0.3, 0.0, 0, 1
     bezier = liner, 1, 1, 1, 1
     # bezier = linear, 0, 0, 1, 1
     bezier = md3_standard, 0.2, 0, 0, 1
     bezier = md3_decel, 0.05, 0.7, 0.1, 1
     bezier = md3_accel, 0.3, 0, 0.8, 0.15
-    bezier = overshot, 0.05, 0.9, 0.1, 1.1
-    bezier = crazyshot, 0.1, 1.5, 0.76, 0.92 
+    bezier = overshot, 0.05, 0.9, 0.1, 1.0
+    bezier = crazyshot, 0.1, 1.0, 0.76, 0.92 
     bezier = hyprnostretch, 0.05, 0.9, 0.1, 1.0
     bezier = menu_decel, 0.1, 1, 0, 1
     bezier = menu_accel, 0.38, 0.04, 1, 0.07
@@ -23,7 +23,8 @@ animations {
     bezier = easeOutCirc, 0, 0.55, 0.45, 1
     bezier = easeOutExpo, 0.16, 1, 0.3, 1
     bezier = softAcDecel, 0.26, 0.26, 0.15, 1
-    bezier = md2, 0.4, 0, 0.2, 1 # use with .2s duration
+    bezier = md1, 0.4, 0, 0.2, 1  # use with .2s duration
+    bezier = md3_decel, 0.05, 0.7, 0.1, 1
     
     # Animation configs
     # animation = windows, 1, 3, md3_decel, popin 60%
diff --git a/config/hypr/animations/Mahaveer - me-1.lua b/config/hypr/animations/Mahaveer - me-1.lua
new file mode 100644
index 00000000..d916e1ce
--- /dev/null
+++ b/config/hypr/animations/Mahaveer - me-1.lua
@@ -0,0 +1,41 @@
+-- Auto-generated from Mahaveer - me-1.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+hl.curve("md3_standard", { type = "bezier", points = { { 0.2, 0 }, { 0, 1 } } })
+hl.curve("md3_decel", { type = "bezier", points = { { 0.05, 0.7 }, { 0.1, 1 } } })
+hl.curve("md3_accel", { type = "bezier", points = { { 0.3, 0 }, { 0.8, 0.15 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+hl.curve("crazyshot", { type = "bezier", points = { { 0.1, 1.0 }, { 0.76, 0.92 } } })
+hl.curve("hyprnostretch", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+hl.curve("menu_decel", { type = "bezier", points = { { 0.1, 1 }, { 0, 1 } } })
+hl.curve("menu_accel", { type = "bezier", points = { { 0.38, 0.04 }, { 1, 0.07 } } })
+hl.curve("easeInOutCirc", { type = "bezier", points = { { 0.85, 0 }, { 0.15, 1 } } })
+hl.curve("easeOutCirc", { type = "bezier", points = { { 0, 0.55 }, { 0.45, 1 } } })
+hl.curve("easeOutExpo", { type = "bezier", points = { { 0.16, 1 }, { 0.3, 1 } } })
+hl.curve("softAcDecel", { type = "bezier", points = { { 0.26, 0.26 }, { 0.15, 1 } } })
+hl.curve("md2", { type = "bezier", points = { { 0.4, 0 }, { 0.2, 1 } } })
+
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 6, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "fade", enabled = true, speed = 3, bezier = "md3_decel" })
+hl.animation({ leaf = "layersIn", enabled = true, speed = 3, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "layersOut", enabled = true, speed = 1.6, bezier = "menu_accel" })
+hl.animation({ leaf = "fadeLayersIn", enabled = true, speed = 2, bezier = "menu_decel" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 4.5, bezier = "menu_accel" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 7, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidefadevert 15%" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidevert" })
diff --git a/config/hypr/animations/Mahaveer - me-2.conf b/config/hypr/animations/Mahaveer - me-2.conf
index 3d9b35ae..439afafa 100644
--- a/config/hypr/animations/Mahaveer - me-2.conf
+++ b/config/hypr/animations/Mahaveer - me-2.conf
@@ -7,13 +7,13 @@
 animations {
   enabled = yes
 
-  bezier = wind, 0.05, 0.9, 0.1, 1.05
-  bezier = winIn, 0.1, 1.1, 0.1, 1.1
-  bezier = winOut, 0.3, -0.3, 0, 1
+  bezier = wind, 0.05, 0.9, 0.1, 1.00
+  bezier = winIn, 0.1, 1.0, 0.1, 1.0
+  bezier = winOut, 0.3, 0.0, 0, 1
   bezier = liner, 1, 1, 1, 1
-  bezier = overshot, 0.05, 0.9, 0.1, 1.05
+  bezier = overshot, 0.05, 0.9, 0.1, 1.00
   bezier = smoothOut, 0.5, 0, 0.99, 0.99
-  bezier = smoothIn, 0.5, -0.5, 0.68, 1.5
+  bezier = smoothIn, 0.5, 0.0, 0.68, 1.0
   
   animation = windows, 1, 6, wind, slide
   animation = windowsIn, 1, 5, winIn, slide
@@ -27,4 +27,4 @@ animations {
   # animations for -git or version >0.42.0
   animation = workspacesIn, 1, 5, winIn, slide
   animation = workspacesOut, 1, 5, winOut, slide
-}
\ No newline at end of file
+}
diff --git a/config/hypr/animations/Mahaveer - me-2.lua b/config/hypr/animations/Mahaveer - me-2.lua
new file mode 100644
index 00000000..b3d55a75
--- /dev/null
+++ b/config/hypr/animations/Mahaveer - me-2.lua
@@ -0,0 +1,26 @@
+-- Auto-generated from Mahaveer - me-2.conf
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("wind", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("winIn", { type = "bezier", points = { { 0.1, 1.0 }, { 0.1, 1.0 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, 0.0 }, { 0, 1 } } })
+hl.curve("liner", { type = "bezier", points = { { 1, 1 }, { 1, 1 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.00 } } })
+hl.curve("smoothOut", { type = "bezier", points = { { 0.5, 0 }, { 0.99, 0.99 } } })
+hl.curve("smoothIn", { type = "bezier", points = { { 0.5, 0.0 }, { 0.68, 1.0 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 5, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 3, bezier = "smoothOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border", enabled = true, speed = 1, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 180, bezier = "liner", style = "loop" })
+hl.animation({ leaf = "fade", enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "overshot" })
+hl.animation({ leaf = "workspacesIn", enabled = true, speed = 5, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "workspacesOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })
diff --git a/config/hypr/animations/Spring-curves.conf b/config/hypr/animations/Spring-curves.conf
new file mode 100644
index 00000000..1663d16e
--- /dev/null
+++ b/config/hypr/animations/Spring-curves.conf
@@ -0,0 +1,25 @@
+# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+#
+# name "Spring-curves"
+
+animations {
+  enabled = yes
+
+  # Hyprland .conf uses bezier curves; these approximate the Lua spring presets.
+  bezier = spring_fast, 0.18, 0.88, 0.14, 1.0
+  bezier = spring_slow, 0.25, 0.82, 0.18, 1.0
+
+  animation = windows, 1, 1, spring_fast
+  animation = windowsIn, 1, 1, spring_fast, popin 50%
+  animation = windowsOut, 1, 1, spring_fast, popin
+  animation = border, 1, 1, spring_slow
+  animation = borderangle, 0
+  animation = fade, 1, 1, spring_slow
+  animation = zoomFactor, 1, 6, spring_fast
+  animation = layersIn, 1, 3, spring_fast, slide
+  animation = layersOut, 1, 1.6, spring_fast, slide
+  animation = fadeLayersIn, 1, 2, spring_fast
+  animation = fadeLayersOut, 1, 1.6, spring_fast
+  animation = workspaces, 1, 1, spring_slow, slide
+  animation = specialWorkspace, 1, 1, spring_slow, slidevert 80%
+}
diff --git a/config/hypr/animations/Spring-curves.lua b/config/hypr/animations/Spring-curves.lua
new file mode 100644
index 00000000..fefc3731
--- /dev/null
+++ b/config/hypr/animations/Spring-curves.lua
@@ -0,0 +1,28 @@
+-- Spring Curves
+hl.curve("spring_fast", { type = "spring", mass = 2, stiffness = 30, dampening = 15 })
+hl.curve("spring_slow", { type = "spring", mass = 2, stiffness = 15, dampening = 10 })
+
+-- Window animations
+hl.animation({ leaf = "windows", enabled = true, speed = 1, spring = "spring_fast" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 1, spring = "spring_fast", style = "popin 50%" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 1, spring = "spring_fast", style = "popin" })
+
+-- Border animations
+hl.animation({ leaf = "border", enabled = true, speed = 1, spring = "spring_slow" })
+hl.animation({ leaf = "borderangle", enabled = false })
+
+-- Fade
+hl.animation({ leaf = "fade", enabled = true, speed = 1, spring = "spring_slow" })
+
+-- Zoom cursor
+hl.animation({ leaf = "zoomFactor", enabled = true, speed = 6, spring = "spring_fast" })
+
+-- Layer animations
+hl.animation({ leaf = "layersIn", enabled = true, speed = 3, spring = "spring_fast", style = "slide" })
+hl.animation({ leaf = "layersOut", enabled = true, speed = 1.6, spring = "spring_fast", style = "slide" })
+hl.animation({ leaf = "fadeLayersIn", enabled = true, speed = 2, spring = "spring_fast" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 1.6, spring = "spring_fast" })
+
+-- Workspace animations
+hl.animation({ leaf = "workspaces", enabled = true, speed = 1, spring = "spring_slow", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 1, spring = "spring_slow", style = "slidevert 80%" })
diff --git a/config/hypr/animations/amitpadhan.conf b/config/hypr/animations/amitpadhan.conf
new file mode 100644
index 00000000..1111e764
--- /dev/null
+++ b/config/hypr/animations/amitpadhan.conf
@@ -0,0 +1,33 @@
+# /* ---- 💫 https://github.com/LinuxBeginnings 💫 ---- */  #
+# Instpired by amitpadhan525 
+# https://github.com/amitpadhan525
+# name "amitpadhan"
+
+animations {
+  enabled = yes
+  # Define your custom Bezier curves
+  # Syntax: bezier = name, x1, y1, x2, y2
+  bezier = myBezier, 0.05, 0.9, 0.1, 1.0
+
+  # Define your animations
+  # Syntax: animation = name, enable, speed, curve, [style]
+  animation = windows, 1, 5, myBezier
+  animation = windowsIn, 1, 5, myBezier
+  animation = windowsOut, 1, 5, myBezier
+  animation = windowsMove, 1, 5, myBezier
+  animation = layers, 1, 5, myBezier
+  animation = layersIn, 1, 5, myBezier
+  animation = layersOut, 1, 5, myBezier
+  animation = border, 1, 10, default
+  animation = borderangle, 1, 8, default
+  animation = fade, 1, 5, default
+  animation = fadeLayersIn, 1, 5, myBezier
+  animation = fadeLayersOut, 1, 5, myBezier
+  animation = workspaces, 1, 5, myBezier, slidefade 20%
+  animation = workspacesIn, 1, 5, myBezier, slide
+  animation = workspacesOut, 1, 5, myBezier, slide
+  animation = specialWorkspace, 1, 5, myBezier, slidevert
+
+}
+
+
diff --git a/config/hypr/animations/amitpadhan.lua b/config/hypr/animations/amitpadhan.lua
new file mode 100644
index 00000000..3434e5ea
--- /dev/null
+++ b/config/hypr/animations/amitpadhan.lua
@@ -0,0 +1,28 @@
+-- 💫 https://github.com/LinuxBeginnings 💫
+-- Inspired by amitpadhan525
+-- https://github.com/amitpadhan525
+
+hl.config({
+  animations = {
+    enabled = true,
+  },
+})
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.0 } } })
+
+hl.animation({ leaf = "windows", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "windowsIn", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "layers", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "layersIn", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "layersOut", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 8, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 5, bezier = "default" })
+hl.animation({ leaf = "fadeLayersIn", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 5, bezier = "myBezier" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "myBezier", style = "slidefade 20%" })
+hl.animation({ leaf = "workspacesIn", enabled = true, speed = 5, bezier = "myBezier", style = "slide" })
+hl.animation({ leaf = "workspacesOut", enabled = true, speed = 5, bezier = "myBezier", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 5, bezier = "myBezier", style = "slidevert" })