Merge pull request #927 from JaKooLit/development

Merge Development to main branch for release 

1 files changed, 216 insertions, 0 deletions

diff --git a/archive/upgrade.sh b/archive/upgrade.sh
new file mode 100755
index 00000000..45624c4f
--- /dev/null
+++ b/archive/upgrade.sh
@@ -0,0 +1,216 @@
+#!/usr/bin/env bash
+# /* ---- 💫 https://github.com/JaKooLit 💫 ---- */  #
+# for Semi-Manual upgrading your system.
+# NOTE: requires rsync 
+
+# Set some colors for output messages
+OK="$(tput setaf 2)[OK]$(tput sgr0)"
+ERROR="$(tput setaf 1)[ERROR]$(tput sgr0)"
+NOTE="$(tput setaf 3)[NOTE]$(tput sgr0)"
+INFO="$(tput setaf 4)[INFO]$(tput sgr0)"
+WARN="$(tput setaf 1)[WARN]$(tput sgr0)"
+CAT="$(tput setaf 6)[ACTION]$(tput sgr0)"
+MAGENTA="$(tput setaf 5)"
+ORANGE="$(tput setaf 214)"
+WARNING="$(tput setaf 1)"
+YELLOW="$(tput setaf 3)"
+GREEN="$(tput setaf 2)"
+BLUE="$(tput setaf 4)"
+SKY_BLUE="$(tput setaf 6)"
+RESET="$(tput sgr0)"
+
+printf "\n%.0s" {1..1}  
+echo -e "\e[35m
+    ╦╔═┌─┐┌─┐╦    ╔╦╗┌─┐┌┬┐┌─┐
+    ╠╩╗│ ││ │║     ║║│ │ │ └─┐ 2025
+    ╩ ╩└─┘└─┘╩═╝  ═╩╝└─┘ ┴ └─┘ upgrade.sh
+\e[0m"
+printf "\n%.0s" {1..1}  
+
+# On Ubuntu/Debian, warn about required Hyprland version and prompt to continue
+if grep -iqE '^(ID_LIKE|ID)=.*(ubuntu|debian)' /etc/os-release >/dev/null 2>&1; then
+  echo "${WARNING} These Dotfiles are only supported on Hyprland 0.51.1 or greater. Do not install on older revisions.${RESET}"
+  while true; do
+    echo -n "${CAT} Do you want to continue anyway? (y/N): ${RESET}"
+    read _continue
+    _continue=$(echo "${_continue}" | tr '[:upper:]' '[:lower:]')
+    case "${_continue}" in
+      y|yes)
+        echo "${NOTE} Proceeding on Ubuntu/Debian by user confirmation." 
+        break
+        ;;
+      n|no|"")
+        printf "\n%.0s" {1..1}
+        echo "${INFO} Aborting per user choice. No changes made." 
+        printf "\n%.0s" {1..1}
+        exit 1
+        ;;
+      *)
+        echo "${WARN} Please answer 'y' or 'n'." 
+        ;;
+    esac
+  done
+fi
+
+echo "${WARNING}A T T E N T I O N !${RESET}"
+echo "${SKY_BLUE}This script is meant to manually upgrade your KooL Hyprland Dots${RESET}"
+echo "${YELLOW}NOTE that you should edit this script and assign an Directory or Files exclusion${RESET}"
+printf "\n%.0s" {1..1}
+echo "${MAGENTA}If you are not sure what you are doing,ran the ${SKY_BLUE}copy.sh${RESET} ${MAGENTA}instead${RESET}"
+printf "\n%.0s" {1..1}
+read -p "${CAT} - Would you like to proceed (y/n): ${RESET}" proceed
+
+if [ "$proceed" != "y" ]; then
+    printf "\n%.0s" {1..1}
+    echo "${INFO} Installation aborted. ${SKY_BLUE}No changes in your system.${RESET} ${YELLOW}Goodbye!${RESET}"
+    printf "\n%.0s" {1..1}
+    exit 1
+fi
+
+# Create Directory for Upgrade Logs
+if [ ! -d Upgrade-Logs ]; then
+    mkdir Upgrade-Logs
+fi
+
+LOG="Upgrade-Logs/upgrade-$(date +%d-%H%M%S)_upgrade_dotfiles.log"
+
+# source and target versions
+source_dir="config"
+target_dir="$HOME/.config"
+
+# Specify the update source directories, their corresponding target directories, and their exclusions
+declare -A directories=(
+    ["config/hypr/"]="$HOME/.config/hypr/"
+    ["config/kitty/"]="$HOME/.config/kitty/"
+    ["config/Kvantum/"]="$HOME/.config/Kvantum/"
+    ["config/nvim/"]="$HOME/.config/nvim/"
+    ["config/qt5ct/"]="$HOME/.config/qt5ct"
+    ["config/qt6ct/"]="$HOME/.config/qt6ct/"
+    ["config/rofi/"]="$HOME/.config/rofi/"
+    ["config/swaync/"]="$HOME/.config/swaync/"
+    ["config/waybar/"]="$HOME/.config/waybar/"
+    ["config/cava/"]="$HOME/.config/cava/"
+    ["config/ags/"]="$HOME/.config/ags/"
+    ["config/quickshell/"]="$HOME/.config/quickshell/"
+    ["config/fastfetch/"]="$HOME/.config/fastfetch/"
+    ["config/wallust/"]="$HOME/.config/wallust/"
+    ["config/wlogout/"]="$HOME/.config/wlogout/"
+    # Add more directories to compare as needed
+)
+
+# Update the exclusion rules
+declare -A exclusions=(
+    ["config/hypr/"]="--exclude=UserConfigs/ --exclude=UserScripts/"
+    ["config/waybar/"]="--exclude=config --exclude=style.css"
+    ["config/rofi/"]="--exclude=.current_wallpaper"
+    ["config/quickshell/"]="--exclude=shell.qml"
+    # Add more exclusions as needed
+)
+
+# Function to compare directories
+compare_directories() {
+    local source_dir="$1"
+    local target_dir="$2"
+    local exclusion="${exclusions[$source_dir]}"  # Get exclusions for the source directory
+
+    # Perform dry-run comparison using rsync with exclusions
+    diff=$(rsync -avn --delete "$source_dir" "$target_dir" $exclusion)
+    echo "$diff"
+}
+
+# Function to create backup of target directory
+create_backup() {
+    local target_dir="$1"
+    local backup_suffix="-b4-upgrade"
+    local target_base=$(basename "$target_dir")
+    local backup_dir="$HOME/.config/${target_base}${backup_suffix}"
+
+    if [ -d "$backup_dir" ]; then
+        echo "$NOTE Updating existing backup of the $target_dir..."
+        rsync -av --delete "$target_dir" "$backup_dir"
+        echo "$NOTE $backup_dir Backup updated successfully." 2>&1 | tee -a "$LOG"
+    else
+        echo "$NOTE Creating backup of the $target_dir..."
+        rsync -av --exclude="${backup_suffix}" "$target_dir" "$backup_dir"/
+        echo "$NOTE $backup_dir Backup created successfully." 2>&1 | tee -a "$LOG"
+    fi
+}
+
+# Check if the version file exists in target directory, if not exit
+target_version_file=$(find "$target_dir/hypr" -name 'v*' | sort -V | tail -n 1)
+if [ -z "$target_version_file" ]; then
+    echo "$ERROR Version number not found in ~/.config/hypr/" 2>&1 | tee -a "$LOG"
+    echo "$ERROR Upgrade your dots first by running ./copy.sh" 2>&1 | tee -a "$LOG"
+    exit 1
+fi
+
+# Get the stored version from the target directory
+stored_version=$(basename "$target_version_file")
+
+# Get the latest version from the source directory
+source_version_file=$(find "$source_dir/hypr" -name 'v*' | sort -V | tail -n 1)
+latest_version=$(basename "$source_version_file")
+
+# Function to compare versions
+version_gt() { test "$(printf '%s\n' "$@" | sort -V | head -n 1)" != "$1"; }
+
+# Compare versions
+if version_gt "$latest_version" "$stored_version"; then
+    echo "$CAT newer version ($latest_version) is available. Do you want to upgrade? (Y/N)" 2>&1 | tee -a "$LOG"
+    read -r answer
+    if [[ "$answer" =~ ^[Yy]$ ]]; then
+        # Loop through directories for comparison
+		for source_directory in "${!directories[@]}"; do
+    	target_directory="${directories[$source_directory]}"
+    	echo "$YELLOW Comparing directories: $source_directory and $target_directory" $RESET    
+    	# Compare source and target directories
+    	comparison=$(compare_directories "$source_directory" "$target_directory")
+    	if [ -n "$comparison" ]; then
+        echo "$NOTE Here are difference of $source_directory and $target_directory:"
+        echo "$comparison"
+        
+        printf "\n%.0s" {1..2}
+        
+        # Prompt user for action
+        echo "$CAT Do you want to copy files and directories from $source_directory to $target_directory? (Y/N)"
+        read -r answer
+
+        if [[ "$answer" =~ ^[Yy]$ ]]; then
+            # Creating backup of the target directory
+            create_backup "$target_directory"
+            
+            printf "\n%.0s" {1..2}
+            # Copy differences from source directory to target directory
+            rsync -av --delete ${exclusions[$source_directory]} "$source_directory" "$target_directory"
+            echo "$NOTE Differences of "$target_directory" copied successfully." 2>&1 | tee -a "$LOG"
+            printf "\n%.0s" {1..2}
+        else
+            	echo "$NOTE No changes were made for $target_directory" 2>&1 | tee -a "$LOG"
+        	fi
+    	else
+        	echo "$OK No differences found between $source_directory and $target_directory" 2>&1 | tee -a "$LOG"
+    	fi
+		done
+		printf "\n%.0s" {1..2}
+        echo "$NOTE Files or directories updated successfully to version $latest_version" 2>&1 | tee -a "$LOG"
+
+        # Set some files as executable
+        chmod +x "$HOME/.config/hypr/scripts/"* 2>&1 | tee -a "$LOG"
+        chmod +x "$HOME/.config/hypr/UserScripts/"* 2>&1 | tee -a "$LOG"
+        # Set executable for initial-boot.sh
+        chmod +x "$HOME/.config/hypr/initial-boot.sh" 2>&1 | tee -a "$LOG"
+        
+    else
+        echo "$MAGENTA Upgrade declined. No files or directories changed" 2>&1 | tee -a "$LOG"
+    fi
+else
+    echo "$OK 👌 No upgrade found. The installed version ${MAGENTA}($stored_version)${RESET} is up to date with the KooL Hyprland-Dots version ${YELLOW}($latest_version)${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..3}
+echo "$(tput bold)$(tput setaf 3)ATTENTION!!!! VERY IMPORTANT NOTICE!!!! $(tput sgr0)" 
+echo "$(tput bold)$(tput setaf 7)If you updated waybar directory, and you have your own waybar layout and styles $(tput sgr0)"
+echo "$(tput bold)$(tput setaf 7)Copy those files from the created backup ~/.config/waybar-b4-upgrade $(tput sgr0)"
+echo "$(tput bold)$(tput setaf 7)Make sure to set your waybar and style before logout or reboot $(tput sgr0)"
+echo "$(tput bold)$(tput setaf 7)SUPER CTRL B for Waybar Styles and SUPER ALT B for Waybar Layout $(tput sgr0)"
+printf "\n%.0s" {1..3}