#!/usr/bin/env bash
# ==================================================
#  KoolDots (2026)
#  Project URL: https://github.com/LinuxBeginnings
#  License: GNU GPLv3
#  SPDX-License-Identifier: GPL-3.0-or-later
# ==================================================
# Copy helpers split into phases to keep copy.sh lean.

copy_phase1() {
  local log="$1"
  local base="${DOTFILES_DIR:-.}"
  local dirs="fastfetch kitty rofi swaync"
  for DIR2 in $dirs; do
    local DIRPATH="$HOME/.config/$DIR2"
    if [ -d "$DIRPATH" ]; then
      while true; do
        printf "\n${INFO:-[INFO]} Found ${YELLOW:-}$DIR2${RESET:-} config found in ~/.config/\n"
        echo -n "${CAT:-[ACTION]} Do you want to replace ${YELLOW:-}$DIR2${RESET:-} config? (y/n): "
        read DIR1_CHOICE
        case "$DIR1_CHOICE" in
        [Yy]*)
          BACKUP_DIR=$(get_backup_dirname)
          mv "$DIRPATH" "$DIRPATH-backup-$BACKUP_DIR" 2>&1 | tee -a "$log"
          echo -e "${NOTE:-[NOTE]} - Backed up $DIR2 to $DIRPATH-backup-$BACKUP_DIR." 2>&1 | tee -a "$log"
          cp -r "$base/config/$DIR2" "$HOME/.config/$DIR2" 2>&1 | tee -a "$log"
          echo -e "${OK:-[OK]} - Replaced $DIR2 with new configuration." 2>&1 | tee -a "$log"
          if [ "$DIR2" = "rofi" ]; then
            if [ -d "$DIRPATH-backup-$BACKUP_DIR/themes" ]; then
              for file in "$DIRPATH-backup-$BACKUP_DIR/themes"/*; do
                [ -e "$file" ] || continue
                cp -n "$file" "$HOME/.config/rofi/themes/" >>"$log" 2>&1 || true
              done || true
            fi
            if [ -f "$DIRPATH-backup-$BACKUP_DIR/0-shared-fonts.rasi" ]; then
              cp "$DIRPATH-backup-$BACKUP_DIR/0-shared-fonts.rasi" "$HOME/.config/rofi/0-shared-fonts.rasi" >>"$log" 2>&1
            fi
          fi
          break
          ;;
        [Nn]*)
          echo -e "${NOTE:-[NOTE]} - Skipping ${YELLOW:-}$DIR2${RESET:-}" 2>&1 | tee -a "$log"
          break
          ;;
        *) echo -e "${WARN:-[WARN]} - Invalid choice. Please enter Y or N." ;;
        esac
      done
    else
      cp -r "$base/config/$DIR2" "$HOME/.config/$DIR2" 2>&1 | tee -a "$log"
      echo -e "${OK:-[OK]} - Copy completed for ${YELLOW:-}$DIR2${RESET:-}" 2>&1 | tee -a "$log"
    fi
  done
}

copy_waybar() {
  local log="$1"
  local base="${DOTFILES_DIR:-.}"
  local DIRW="waybar"
  local DIRPATHw="$HOME/.config/$DIRW"
  if [ -d "$DIRPATHw" ]; then
    while true; do
      echo -n "${CAT:-[ACTION]} Do you want to replace ${YELLOW:-}$DIRW${RESET:-} config? (y/n): "
      read DIR1_CHOICE
      case "$DIR1_CHOICE" in
      [Yy]*)
        BACKUP_DIR=$(get_backup_dirname)
        cp -r "$DIRPATHw" "$DIRPATHw-backup-$BACKUP_DIR" 2>&1 | tee -a "$log"
        echo -e "${NOTE:-[NOTE]} - Backed up $DIRW to $DIRPATHw-backup-$BACKUP_DIR." 2>&1 | tee -a "$log"
        rm -rf "$DIRPATHw" && cp -r "$base/config/$DIRW" "$DIRPATHw" 2>&1 | tee -a "$log"
        for file in "config" "style.css"; do
          symlink="$DIRPATHw-backup-$BACKUP_DIR/$file"
          target_file="$DIRPATHw/$file"
          if [ -L "$symlink" ]; then
            symlink_target=$(readlink "$symlink")
            if [ -f "$symlink_target" ]; then
              rm -f "$target_file" && cp -f "$symlink_target" "$target_file"
            fi
          fi
        done
        for dir in "$DIRPATHw-backup-$BACKUP_DIR/configs"/*; do
          [ -e "$dir" ] || continue
          if [ -d "$dir" ]; then
            target_dir="$HOME/.config/waybar/configs/$(basename "$dir")"
            [ -d "$target_dir" ] || cp -r "$dir" "$HOME/.config/waybar/configs/"
          fi
        done
        for file in "$DIRPATHw-backup-$BACKUP_DIR/configs"/*; do
          [ -e "$file" ] || continue
          target_file="$HOME/.config/waybar/configs/$(basename "$file")"
          [ -e "$target_file" ] || cp "$file" "$HOME/.config/waybar/configs/"
        done || true
        for file in "$DIRPATHw-backup-$BACKUP_DIR/style"/*; do
          [ -e "$file" ] || continue
          if [ -d "$file" ]; then
            target_dir="$HOME/.config/waybar/style/$(basename "$file")"
            [ -d "$target_dir" ] || cp -r "$file" "$HOME/.config/waybar/style/"
          else
            target_file="$HOME/.config/waybar/style/$(basename "$file")"
            [ -e "$target_file" ] || cp "$file" "$HOME/.config/waybar/style/"
          fi
        done || true
        BACKUP_FILEw="$DIRPATHw-backup-$BACKUP_DIR/UserModules"
        [ -f "$BACKUP_FILEw" ] && cp -f "$BACKUP_FILEw" "$DIRPATHw/UserModules"
        break
        ;;
      [Nn]*)
        echo -e "${NOTE:-[NOTE]} - Skipping ${YELLOW:-}$DIRW${RESET:-} config replacement." 2>&1 | tee -a "$log"
        break
        ;;
      *) echo -e "${WARN:-[WARN]} - Invalid choice. Please enter Y or N." ;;
      esac
    done
  else
    cp -r "$base/config/$DIRW" "$DIRPATHw" 2>&1 | tee -a "$log"
    echo -e "${OK:-[OK]} - Copy completed for ${YELLOW:-}$DIRW${RESET:-}" 2>&1 | tee -a "$log"
  fi
}

copy_phase2() {
  local log="$1"
  local base="${DOTFILES_DIR:-.}"
  local DIR="btop cava hypr Kvantum qt5ct qt6ct swappy wallust wlogout"
  for DIR_NAME in $DIR; do
    local DIRPATH="$HOME/.config/$DIR_NAME"
    if [ -d "$DIRPATH" ]; then
      echo -e "\n${NOTE:-[NOTE]} - Config for ${YELLOW:-}$DIR_NAME${RESET:-} found, attempting to back up."
      BACKUP_DIR=$(get_backup_dirname)
      mv "$DIRPATH" "$DIRPATH-backup-$BACKUP_DIR" 2>&1 | tee -a "$log"
    fi
    if [ -d "$base/config/$DIR_NAME" ]; then
      cp -r "$base/config/$DIR_NAME/" "$HOME/.config/$DIR_NAME" 2>&1 | tee -a "$log"
      echo "${OK:-[OK]} - Copy of config for ${YELLOW:-}$DIR_NAME${RESET:-} completed!" 2>&1 | tee -a "$log"
    else
      echo "${ERROR:-[ERROR]} - Directory config/$DIR_NAME does not exist to copy." 2>&1 | tee -a "$log"
    fi
  done
  install_terminal_configs "$log"
}

# Restore Animations and Monitor Profiles plus key hypr files from backup
restore_hypr_assets() {
  local log="$1"
  local express_mode="$2"

  local HYPR_DIR="$HOME/.config/hypr"
  local BACKUP_DIR
  BACKUP_DIR=$(get_backup_dirname)
  local BACKUP_HYPR_PATH="$HYPR_DIR-backup-$BACKUP_DIR"

  if [ -d "$BACKUP_HYPR_PATH" ]; then
    if [ "$express_mode" -eq 1 ]; then
      echo "${NOTE:-[NOTE]} Express mode: skipping automatic restoration of animations and monitor profiles." 2>&1 | tee -a "$log"
      return
    fi

    echo -e "\n${NOTE:-[NOTE]} Restoring ${SKY_BLUE:-}Animations & Monitor Profiles${RESET:-} into ${YELLOW:-}$HYPR_DIR${RESET:-}..."

    # Fresh installs should apply repo defaults; do not restore a previous wallpaper.
    # RUN_MODE is set by copy.sh (install|upgrade|express) and is visible here.
    local DIR_B=("Monitor_Profiles" "animations")
    if [ "${RUN_MODE:-}" != "install" ]; then
      DIR_B+=("wallpaper_effects")
    else
      echo "${NOTE:-[NOTE]} Fresh install: skipping restore of wallpaper_effects so default wallpaper applies." 2>&1 | tee -a "$log"
    fi

    for DIR_RESTORE in "${DIR_B[@]}"; do
      local BACKUP_SUBDIR="$BACKUP_HYPR_PATH/$DIR_RESTORE"
      if [ -d "$BACKUP_SUBDIR" ]; then
        cp -r "$BACKUP_SUBDIR" "$HYPR_DIR/" 2>&1 | tee -a "$log"
        echo "${OK:-[OK]} - Restored directory: ${MAGENTA:-}$DIR_RESTORE${RESET:-}" 2>&1 | tee -a "$log"
      fi
    done

    local FILE_B=("monitors.conf" "workspaces.conf")
    for FILE_RESTORE in "${FILE_B[@]}"; do
      local BACKUP_FILE="$BACKUP_HYPR_PATH/$FILE_RESTORE"
      if [ -f "$BACKUP_FILE" ]; then
        cp "$BACKUP_FILE" "$HYPR_DIR/$FILE_RESTORE" 2>&1 | tee -a "$log"
        echo "${OK:-[OK]} - Restored file: ${MAGENTA:-}$FILE_RESTORE${RESET:-}" 2>&1 | tee -a "$log"
      fi
    done
  fi
}

# Helper to extract overlay additions/disables from previous user file vs base
compose_overlay_from_backup() {
  local type="$1" # startup|windowrules
  local base_file="$2"
  local old_user_file="$3"
  local new_user_file="$4"
  local disable_file="$5"

  mkdir -p "$(dirname "$new_user_file")"
  : >"$new_user_file"
  : >"$disable_file"

  if [ "$type" = "startup" ]; then
    grep -E '^\s*exec-once\s*=' "$old_user_file" | sed -E 's/^\s+//;s/\s+$//' | sort -u >"$old_user_file.tmp.exec"
    grep -E '^\s*exec-once\s*=' "$base_file" | sed -E 's/^\s+//;s/\s+$//' | sort -u >"$base_file.tmp.exec"
    comm -23 "$old_user_file.tmp.exec" "$base_file.tmp.exec" >"$new_user_file"
    grep -E '^\s*#\s*exec-once\s*=' "$old_user_file" |
      sed -E 's/^\s*#\s*exec-once\s*=\s*//' |
      sed -E 's/^\s+//;s/\s+$//' |
      grep -Ev '^\$scriptsDir/KeybindsLayoutInit\.sh$' |
      sort -u >"$disable_file"
    rm -f "$old_user_file.tmp.exec" "$base_file.tmp.exec"
  elif [ "$type" = "windowrules" ]; then
    grep -E '^(windowrule|layerrule)\s*=' "$old_user_file" | sed -E 's/^\s+//;s/\s+$//' | sort -u >"$old_user_file.tmp.rules"
    grep -E '^(windowrule|layerrule)\s*=' "$base_file" | sed -E 's/^\s+//;s/\s+$//' | sort -u >"$base_file.tmp.rules"
    comm -23 "$old_user_file.tmp.rules" "$base_file.tmp.rules" >"$new_user_file"
    grep -E '^\s*#\s*(windowrule|layerrule)\s*=' "$old_user_file" | sed -E 's/^\s*#\s*//' | sed -E 's/^\s+//;s/\s+$//' | sort -u >"$disable_file"
    rm -f "$old_user_file.tmp.rules" "$base_file.tmp.rules"
  fi
}

cleanup_duplicate_userconfigs() {
  local current_version="$1"
  local log="$2"

  if [ -z "$current_version" ]; then
    return
  fi

  # Run de-dupe only for existing installs up to and including v2.3.18.
  # For v2.3.19 and newer, UserConfigs should be left as-is to avoid
  # removing user modifications.
  if version_gte "$current_version" "2.3.19"; then
    echo "${INFO:-[INFO]} Skipping UserConfigs duplicate cleanup for detected version v$current_version (>= 2.3.19)." 2>&1 | tee -a "$log"
    return
  fi

  echo "${INFO:-[INFO]} Running UserConfigs duplicate cleanup for detected version v$current_version (<= 2.3.18)." 2>&1 | tee -a "$log"

  local HYPR_DIR="$HOME/.config/hypr"
  local BASE_DIR="$HYPR_DIR/configs"
  local USER_DIR="$HYPR_DIR/UserConfigs"

  local STARTUP_BASE="$BASE_DIR/Startup_Apps.conf"
  local STARTUP_USER="$USER_DIR/Startup_Apps.conf"
  local WINDOW_BASE="$BASE_DIR/WindowRules.conf"
  local WINDOW_USER="$USER_DIR/WindowRules.conf"
  local KEYBINDS_BASE="$BASE_DIR/Keybinds.conf"
  local KEYBINDS_USER="$USER_DIR/UserKeybinds.conf"

  # Startup_Apps: strip exec-once lines from UserConfigs that are exact
  # duplicates of the base Startup_Apps.conf.
  if [ -f "$STARTUP_BASE" ] && [ -f "$STARTUP_USER" ]; then
    local tmp_startup
    local backup_startup
    backup_startup="$STARTUP_USER.backup-dupfix-$(date +%Y%m%d-%H%M%S)"
    tmp_startup=$(mktemp)
    awk '
      function trim(s){ gsub(/^[ \t]+|[ \t]+$/, "", s); return s }
      FNR==NR {
        if ($0 ~ /^[ \t]*exec-once[ \t]*=/) {
          line=trim($0)
          base[line]=1
        }
        next
      }
      {
        if ($0 ~ /^[ \t]*exec-once[ \t]*=/) {
          line=trim($0)
          if (line in base) next
        }
        print
      }
    ' "$STARTUP_BASE" "$STARTUP_USER" >"$tmp_startup"
    if ! cmp -s "$STARTUP_USER" "$tmp_startup"; then
      cp "$STARTUP_USER" "$backup_startup"
      mv "$tmp_startup" "$STARTUP_USER"
      echo "${NOTE:-[NOTE]} - Removed duplicate Startup_Apps entries matching base config." 2>&1 | tee -a "$log"
    else
      rm -f "$tmp_startup"
    fi
  fi

  # WindowRules: strip windowrule/layerrule lines from UserConfigs that
  # are exact duplicates of the base WindowRules.conf.
  if [ -f "$WINDOW_BASE" ] && [ -f "$WINDOW_USER" ]; then
    local tmp_window
    local backup_window
    backup_window="$WINDOW_USER.backup-dupfix-$(date +%Y%m%d-%H%M%S)"
    tmp_window=$(mktemp)
    awk '
      function trim(s){ gsub(/^[ \t]+|[ \t]+$/, "", s); return s }
      FNR==NR {
        if ($0 ~ /^[ \t]*(windowrule|layerrule)[ \t]*=/) {
          line=trim($0)
          base[line]=1
        }
        next
      }
      {
        if ($0 ~ /^[ \t]*(windowrule|layerrule)[ \t]*=/) {
          line=trim($0)
          if (line in base) next
        }
        print
      }
    ' "$WINDOW_BASE" "$WINDOW_USER" >"$tmp_window"
    if ! cmp -s "$WINDOW_USER" "$tmp_window"; then
      cp "$WINDOW_USER" "$backup_window"
      mv "$tmp_window" "$WINDOW_USER"
      echo "${NOTE:-[NOTE]} - Removed duplicate WindowRules entries matching base config." 2>&1 | tee -a "$log"
    else
      rm -f "$tmp_window"
    fi
  fi

  # Keybinds: strip bind* lines from UserKeybinds.conf that are exact
  # duplicates of the base Keybinds.conf. Comments and unbinds are kept.
  if [ -f "$KEYBINDS_BASE" ] && [ -f "$KEYBINDS_USER" ]; then
    local tmp_keybinds
    local backup_keybinds
    backup_keybinds="$KEYBINDS_USER.backup-dupfix-$(date +%Y%m%d-%H%M%S)"
    tmp_keybinds=$(mktemp)
    awk '
      function trim(s){ gsub(/^[ \t]+|[ \t]+$/, "", s); return s }
      FNR==NR {
        # Match any Hyprland bind variant: bindd, bindmd, bindld, binded,
        # bindlnd, bindeld, etc.
        if ($0 ~ /^[ \t]*bind[a-z]*[ \t]*=/) {
          line=trim($0)
          base[line]=1
        }
        next
      }
      {
        if ($0 ~ /^[ \t]*bind[a-z]*[ \t]*=/) {
          line=trim($0)
          if (line in base) next
        }
        print
      }
    ' "$KEYBINDS_BASE" "$KEYBINDS_USER" >"$tmp_keybinds"
    if ! cmp -s "$KEYBINDS_USER" "$tmp_keybinds"; then
      cp "$KEYBINDS_USER" "$backup_keybinds"
      mv "$tmp_keybinds" "$KEYBINDS_USER"
      echo "${NOTE:-[NOTE]} - Removed duplicate UserKeybinds entries matching base Keybinds.conf." 2>&1 | tee -a "$log"
    else
      rm -f "$tmp_keybinds"
    fi
  fi
}
restore_user_configs() {
  local log="$1"
  local express_mode="$2"
  local old_version="$3"
  if [ "${RUN_MODE:-}" = "install" ]; then
    return
  fi

  local DIRPATH="$HOME/.config/hypr"
  local BACKUP_DIR
  BACKUP_DIR=$(get_backup_dirname)
  local BACKUP_DIR_PATH="$DIRPATH-backup-$BACKUP_DIR/UserConfigs"

  if [ -z "$BACKUP_DIR" ]; then
    echo "${ERROR:-[ERROR]} - Backup directory name is empty. Exiting." 2>&1 | tee -a "$log"
    exit 1
  fi

  if [ -d "$BACKUP_DIR_PATH" ]; then
    local VERSION_FILE
    VERSION_FILE=$(find "$DIRPATH" -maxdepth 1 -name "v*.*.*" | head -n 1)
    local CURRENT_VERSION="999.9.9"
    if [ -n "$old_version" ]; then
      CURRENT_VERSION="$old_version"
    fi

    local TARGET_VERSION="2.3.19"
    local AUTO_RESTORE=0
    if version_gte "$CURRENT_VERSION" "2.3.18"; then
      AUTO_RESTORE=1
    fi

    echo -e "${NOTE:-[NOTE]} Restoring previous ${MAGENTA:-}User-Configs${RESET:-}... " 2>&1 | tee -a "$log"
    printf "${WARNING:-}\\
    █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█\\n\\
            NOTES for RESTORING PREVIOUS CONFIGS\\n\\
    █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█\\n\\n\\
    The 'UserConfigs' directory is for all your personal settings.\\n\\
    Files in this directory will override the default configurations,\\n\\
    so your customizations are not lost when you update.\\n\\
" >&2

    if version_gte "$CURRENT_VERSION" "$TARGET_VERSION"; then
      if [ "$express_mode" -eq 1 ] || [ "$AUTO_RESTORE" -eq 1 ]; then
        echo "${NOTE:-[NOTE]} Restoring UserConfigs directory automatically." 2>&1 | tee -a "$log"
        rsync -a "$BACKUP_DIR_PATH/" "$DIRPATH/UserConfigs/" 2>&1 | tee -a "$log"
        echo "${OK:-[OK]} - UserConfigs directory restored." 2>&1 | tee -a "$log"
      else
        read -r -p "${CAT:-[ACTION]} Do you want to restore your previous UserConfigs directory? (Y/n): " restore_userconfigs_dir
        if [[ "$restore_userconfigs_dir" != [Nn]* ]]; then
          echo "${NOTE:-[NOTE]} Restoring UserConfigs directory..." 2>&1 | tee -a "$log"
          rsync -a "$BACKUP_DIR_PATH/" "$DIRPATH/UserConfigs/" 2>&1 | tee -a "$log"
          echo "${OK:-[OK]} - UserConfigs directory restored." 2>&1 | tee -a "$log"
        else
          echo "${NOTE:-[NOTE]} - Skipped restoring UserConfigs." 2>&1 | tee -a "$log"
        fi
      fi
    else
      echo -e "${NOTE:-[NOTE]} Detected version ${YELLOW:-}v$CURRENT_VERSION${RESET:-} (older than v$TARGET_VERSION). Using legacy restoration mode." 2>&1 | tee -a "$log"

      local FILES_TO_RESTORE=(
        "01-UserDefaults.conf"
        "ENVariables.conf"
        "LaptopDisplay.conf"
        "Laptops.conf"
        "Startup_Apps.conf"
        "UserDecorations.conf"
        "UserAnimations.conf"
        "UserKeybinds.conf"
        "UserSettings.conf"
        "WindowRules.conf"
      )

      for FILE_NAME in "${FILES_TO_RESTORE[@]}"; do
        local BACKUP_FILE="$BACKUP_DIR_PATH/$FILE_NAME"
        if [ -f "$BACKUP_FILE" ]; then
          if [ "$FILE_NAME" = "Startup_Apps.conf" ]; then
            compose_overlay_from_backup "startup" "$DIRPATH/configs/Startup_Apps.conf" "$BACKUP_FILE" "$DIRPATH/UserConfigs/Startup_Apps.conf" "$DIRPATH/UserConfigs/Startup_Apps.disable"
            echo "${OK:-[OK]} - Migrated overlay for ${YELLOW:-}$FILE_NAME${RESET:-}" 2>&1 | tee -a "$log"
            continue
          fi
          if [ "$FILE_NAME" = "WindowRules.conf" ]; then
            compose_overlay_from_backup "windowrules" "$DIRPATH/configs/WindowRules.conf" "$BACKUP_FILE" "$DIRPATH/UserConfigs/WindowRules.conf" "$DIRPATH/UserConfigs/WindowRules.disable"
            echo "${OK:-[OK]} - Migrated overlay for ${YELLOW:-}$FILE_NAME${RESET:-}" 2>&1 | tee -a "$log"
            continue
          fi
          if [ "$express_mode" -eq 1 ] || [ "$AUTO_RESTORE" -eq 1 ]; then
            if cp "$BACKUP_FILE" "$DIRPATH/UserConfigs/$FILE_NAME"; then
              echo "${OK:-[OK]} - $FILE_NAME restored!" 2>&1 | tee -a "$log"
            else
              echo "${ERROR:-[ERROR]} - Failed to restore $FILE_NAME!" 2>&1 | tee -a "$log"
            fi
          else
            printf "\n${INFO:-[INFO]} Found ${YELLOW:-}$FILE_NAME${RESET:-} in hypr backup...\n"
            read -r -p "${CAT:-[ACTION]} Do you want to restore ${YELLOW:-}$FILE_NAME${RESET:-} from backup? (Y/n): " file_restore

            if [[ "$file_restore" != [Nn]* ]]; then
              if cp "$BACKUP_FILE" "$DIRPATH/UserConfigs/$FILE_NAME"; then
                echo "${OK:-[OK]} - $FILE_NAME restored!" 2>&1 | tee -a "$log"
              else
                echo "${ERROR:-[ERROR]} - Failed to restore $FILE_NAME!" 2>&1 | tee -a "$log"
              fi
            else
              echo "${NOTE:-[NOTE]} - Skipped restoring $FILE_NAME." 2>&1 | tee -a "$log"
            fi
          fi
        fi
      done
    fi
  fi

  # Always run de-dupe based on the installed dotfiles version so that
  # express mode and standard mode behave consistently. Prefer the
  # pre-upgrade version (old_version) if provided so we still clean up
  # legacy duplicates when upgrading to a newer release that no longer
  # needs the fix.
  local detected_version="$old_version"
  if [ -z "$detected_version" ]; then
    detected_version=$(get_installed_dotfiles_version)
  fi
  if [ -n "$detected_version" ]; then
    cleanup_duplicate_userconfigs "$detected_version" "$log"
  fi
}

restore_user_scripts() {
  local log="$1"
  local express_mode="$2"

  local DIRSHPATH="$HOME/.config/hypr"
  local BACKUP_DIR
  BACKUP_DIR=$(get_backup_dirname)
  local BACKUP_DIR_PATH_S="$DIRSHPATH-backup-$BACKUP_DIR/UserScripts"
  local SCRIPTS_TO_RESTORE=("RofiBeats.sh" "Weather.py" "Weather.sh")

  if [ -d "$BACKUP_DIR_PATH_S" ] && [ "$express_mode" -eq 1 ]; then
    echo "${NOTE:-[NOTE]} Express mode: skipping UserScripts restoration prompts." 2>&1 | tee -a "$log"
    return
  fi

  if [ -d "$BACKUP_DIR_PATH_S" ] && [ "$express_mode" -eq 0 ]; then
    echo -e "${NOTE:-[NOTE]} Restoring previous ${MAGENTA:-}User-Scripts${RESET:-}..." 2>&1 | tee -a "$log"

    for SCRIPT_NAME in "${SCRIPTS_TO_RESTORE[@]}"; do
      local BACKUP_SCRIPT="$BACKUP_DIR_PATH_S/$SCRIPT_NAME"
      if [ -f "$BACKUP_SCRIPT" ]; then
        printf "\n${INFO:-[INFO]} Found ${YELLOW:-}$SCRIPT_NAME${RESET:-} in hypr backup...\n"
        read -r -p "${CAT:-[ACTION]} Do you want to restore ${YELLOW:-}$SCRIPT_NAME${RESET:-} from backup? (y/N): " script_restore

        if [[ "$script_restore" == [Yy]* ]]; then
          if cp "$BACKUP_SCRIPT" "$DIRSHPATH/UserScripts/$SCRIPT_NAME"; then
            echo "${OK:-[OK]} - $SCRIPT_NAME restored!" 2>&1 | tee -a "$log"
          else
            echo "${ERROR:-[ERROR]} - Failed to restore $SCRIPT_NAME!" 2>&1 | tee -a "$log"
          fi
        else
          echo "${NOTE:-[NOTE]} - Skipped restoring $SCRIPT_NAME." 2>&1 | tee -a "$log"
        fi
      fi
    done
  fi
}

restore_terminal_configs() {
  local log="$1"
  local express_mode="$2"

  local GHOSTTY_DIR="${XDG_CONFIG_HOME:-$HOME/.config}/ghostty"
  local BACKUP_DIR
  BACKUP_DIR=$(get_backup_dirname)
  local GHOSTTY_BACKUP="$GHOSTTY_DIR-backup-$BACKUP_DIR"

  if [ -d "$GHOSTTY_BACKUP" ] && [ "$express_mode" -eq 1 ]; then
    echo "${NOTE:-[NOTE]} Express mode: skipping Ghostty restore prompt." 2>&1 | tee -a "$log"
    return
  fi

  if [ -d "$GHOSTTY_BACKUP" ] && [ "$express_mode" -eq 0 ]; then
    echo -e "${NOTE:-[NOTE]} Restore previous ${MAGENTA:-}Ghostty${RESET:-} config?" 2>&1 | tee -a "$log"
    read -r -p "${CAT:-[ACTION]} Do you want to restore Ghostty config from backup? (y/N): " restore_ghostty
    if [[ "$restore_ghostty" == [Yy]* ]]; then
      rm -rf "$GHOSTTY_DIR"
      cp -a "$GHOSTTY_BACKUP" "$GHOSTTY_DIR" 2>&1 | tee -a "$log"
      echo "${OK:-[OK]} - Ghostty config restored." 2>&1 | tee -a "$log"
    else
      echo "${NOTE:-[NOTE]} - Skipped restoring Ghostty config." 2>&1 | tee -a "$log"
    fi
  fi
}
restore_hypr_files() {
  local log="$1"
  local express_mode="$2"

  local DIRPATH="$HOME/.config/hypr"
  local BACKUP_DIR
  BACKUP_DIR=$(get_backup_dirname)
  local BACKUP_DIR_PATH_F="$DIRPATH-backup-$BACKUP_DIR"
  local FILES_2_RESTORE=("hyprlock.conf" "hypridle.conf")

  if [ -d "$BACKUP_DIR_PATH_F" ] && [ "$express_mode" -eq 1 ]; then
    echo "${NOTE:-[NOTE]} Express mode: skipping individual hypr file restoration prompts." 2>&1 | tee -a "$log"
    return
  fi

  if [ -d "$BACKUP_DIR_PATH_F" ] && [ "$express_mode" -eq 0 ]; then
    echo -e "${NOTE:-[NOTE]} Restoring some files in ${MAGENTA:-}$HOME/.config/hypr directory${RESET:-}..." 2>&1 | tee -a "$log"

    for FILE_RESTORE in "${FILES_2_RESTORE[@]}"; do
      local BACKUP_FILE="$BACKUP_DIR_PATH_F/$FILE_RESTORE"
      if [ -f "$BACKUP_FILE" ]; then
        echo -e "\n${INFO:-[INFO]} Found ${YELLOW:-}$FILE_RESTORE${RESET:-} in hypr backup..."
        read -r -p "${CAT:-[ACTION]} Do you want to restore ${YELLOW:-}$FILE_RESTORE${RESET:-} from backup? (y/N): " file2restore

        if [[ "$file2restore" == [Yy]* ]]; then
          if cp "$BACKUP_FILE" "$DIRPATH/$FILE_RESTORE"; then
            echo "${OK:-[OK]} - $FILE_RESTORE restored!" 2>&1 | tee -a "$log"
          else
            echo "${ERROR:-[ERROR]} - Failed to restore $FILE_RESTORE!" 2>&1 | tee -a "$log"
          fi
        else
          echo "${NOTE:-[NOTE]} - Skipped restoring $FILE_RESTORE." 2>&1 | tee -a "$log"
        fi
      else
        echo "${ERROR:-[ERROR]} - Backup file $BACKUP_FILE does not exist." 2>&1 | tee -a "$log"
      fi
    done
  fi
}