From d7ff1c1dea16619a38f35536a5c00685d848abce Mon Sep 17 00:00:00 2001 From: JaKooLit Date: Fri, 10 May 2024 02:03:31 +0900 Subject: Initial Push - Moving to Wallust from Pywal --- config/wal/templates/cava-colors | 184 ---------------------------- config/wal/templates/colors-hyprland | 18 --- config/wal/templates/colors-rofi-dark.rasi | 166 ------------------------- config/wal/templates/colors-rofi-light.rasi | 166 ------------------------- 4 files changed, 534 deletions(-) delete mode 100644 config/wal/templates/cava-colors delete mode 100644 config/wal/templates/colors-hyprland delete mode 100644 config/wal/templates/colors-rofi-dark.rasi delete mode 100644 config/wal/templates/colors-rofi-light.rasi (limited to 'config/wal') diff --git a/config/wal/templates/cava-colors b/config/wal/templates/cava-colors deleted file mode 100644 index 4978058c..00000000 --- a/config/wal/templates/cava-colors +++ /dev/null @@ -1,184 +0,0 @@ -## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting. - - -[general] - -# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0 -; mode = normal - -# Accepts only non-negative values. -; framerate = 60 - -# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off -# new as of 0.6.0 autosens of low values (dynamic range) -# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0 -; autosens = 1 -; overshoot = 20 - -# Manual sensitivity in %. If autosens is enabled, this will only be the initial value. -# 200 means double height. Accepts only non-negative values. -; sensitivity = 100 - -# The number of bars (0-200). 0 sets it to auto (fill up console). -# Bars' width and space between bars in number of characters. -; bars = 0 -; bar_width = 2 -; bar_spacing = 1 - -# For SDL width and space between bars is in pixels, defaults are: -; bar_width = 20 -; bar_spacing = 5 - - -# Lower and higher cutoff frequencies for lowest and highest bars -# the bandwidth of the visualizer. -# Note: there is a minimum total bandwidth of 43Mhz x number of bars. -# Cava will automatically increase the higher cutoff if a too low band is specified. -; lower_cutoff_freq = 50 -; higher_cutoff_freq = 10000 - - -# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and -# only check for input once per second. Cava will wake up once input is detected. 0 = disable. -; sleep_timer = 0 - - -[input] - -# Audio capturing method. Possible methods are: 'pulse', 'alsa', 'fifo', 'sndio' or 'shmem' -# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with. -# -# All input methods uses the same config variable 'source' -# to define where it should get the audio. -# -# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink -# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them). -# -# For alsa 'source' will be the capture device. -# For fifo 'source' will be the path to fifo-file. -# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address -method = pulse -source = auto - -; method = alsa -; source = hw:Loopback,1 - -; method = fifo -; source = /tmp/mpd.fifo -; sample_rate = 44100 -; sample_bits = 16 - -; method = shmem -; source = /squeezelite-AA:BB:CC:DD:EE:FF - -; method = portaudio -; source = auto - - -[output] - -# Output method. Can be 'ncurses', 'noncurses', 'raw' or 'sdl'. -# 'noncurses' uses a custom framebuffer technique and prints only changes -# from frame to frame in the terminal. 'ncurses' is default if supported. -# -# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data -# stream of the bar heights that can be used to send to other applications. -# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above. -# -# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context. -; method = ncurses - -# Visual channels. Can be 'stereo' or 'mono'. -# 'stereo' mirrors both channels with low frequencies in center. -# 'mono' outputs left to right lowest to highest frequencies. -# 'mono_option' set mono to either take input from 'left', 'right' or 'average'. -; channels = stereo -; mono_option = average - -# Raw output target. A fifo will be created if target does not exist. -; raw_target = /dev/stdout - -# Raw data format. Can be 'binary' or 'ascii'. -; data_format = binary - -# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530). -; bit_format = 16bit - -# Ascii max value. In 'ascii' mode range will run from 0 to value specified here -; ascii_max_range = 1000 - -# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters. -# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)). -; bar_delimiter = 59 -; frame_delimiter = 10 - -# sdl window size and position. -1,-1 is centered. -; sdl_width = 1000 -; sdl_height = 500 -; sdl_x = -1 -; sdl_y= -1 - -[color] - -# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow. -# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires -# ncurses output method and a terminal that can change color definitions such as Gnome-terminal or rxvt. -# if supported, ncurses mode will be forced on if user defined colors are used. -# default is to keep current terminal color -; background = default -; foreground = default - -# SDL only support hex code colors, these are the default: -; background = '#111111' -; foreground = '#33cccc' - - -# Gradient mode, only hex defined colors (and thereby ncurses mode) are supported, -# background must also be defined in hex or remain commented out. 1 = on, 0 = off. -# You can define as many as 8 different colors. They range from bottom to top of screen -# In the [color] section - -[color] - -gradient = 1 - -gradient_color_1 = '{color0}' -gradient_color_2 = '{color2}' -gradient_color_3 = '{color3}' -gradient_color_4 = '{color5}' -gradient_color_5 = '{color7}' -gradient_color_6 = '{color12}' -gradient_color_7 = '{color13}' -gradient_color_8 = '{color15}' - - - -[smoothing] - -# Percentage value for integral smoothing. Takes values from 0 - 100. -# Higher values means smoother, but less precise. 0 to disable. -; integral = 77 - -# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable. -; monstercat = 0 -; waves = 0 - -# Set gravity percentage for "drop off". Higher values means bars will drop faster. -# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off". -; gravity = 100 - - -# In bar height, bars that would have been lower that this will not be drawn. -; ignore = 0 - - -[eq] - -# This one is tricky. You can have as much keys as you want. -# Remember to uncomment more then one key! More keys = more precision. -# Look at readme.md on github for further explanations and examples. -; 1 = 1 # bass -; 2 = 1 -; 3 = 1 # midtone -; 4 = 1 -; 5 = 1 # treble diff --git a/config/wal/templates/colors-hyprland b/config/wal/templates/colors-hyprland deleted file mode 100644 index c1ccbaf2..00000000 --- a/config/wal/templates/colors-hyprland +++ /dev/null @@ -1,18 +0,0 @@ -$foregroundCol = 0xff{foreground.strip} -$backgroundCol = 0xff{background.strip} -$color0 = 0xff{color0.strip} -$color1 = 0xff{color1.strip} -$color2 = 0xff{color2.strip} -$color3 = 0xff{color3.strip} -$color4 = 0xff{color4.strip} -$color5 = 0xff{color5.strip} -$color6 = 0xff{color6.strip} -$color7 = 0xff{color7.strip} -$color8 = 0xff{color8.strip} -$color9 = 0xff{color9.strip} -$color10 = 0xff{color10.strip} -$color11 = 0xff{color11.strip} -$color12 = 0xff{color12.strip} -$color13 = 0xff{color13.strip} -$color14 = 0xff{color14.strip} -$color15 = 0xff{color15.strip} diff --git a/config/wal/templates/colors-rofi-dark.rasi b/config/wal/templates/colors-rofi-dark.rasi deleted file mode 100644 index 7d1488b7..00000000 --- a/config/wal/templates/colors-rofi-dark.rasi +++ /dev/null @@ -1,166 +0,0 @@ -* {{ - active-background: {color2}; - active-foreground: @foreground; - normal-background: @background; - normal-foreground: @foreground; - urgent-background: {color1}; - urgent-foreground: @foreground; - - alternate-active-background: @background; - alternate-active-foreground: @foreground; - alternate-normal-background: @background; - alternate-normal-foreground: @foreground; - alternate-urgent-background: @background; - alternate-urgent-foreground: @foreground; - - selected-active-background: {color1}; - selected-active-foreground: @foreground; - selected-normal-background: {color2}; - selected-normal-foreground: @foreground; - selected-urgent-background: {color3}; - selected-urgent-foreground: @foreground; - - background-color: @background; - background: rgba(0,0,0,0.7); - foreground: {foreground}; - border-color: @background; - spacing: 2; -}} - -#window {{ - background-color: @background; - border: 0; - padding: 2.5ch; -}} - -#mainbox {{ - border: 0; - padding: 0; -}} - -#message {{ - border: 2px 0px 0px; - border-color: @border-color; - padding: 1px; -}} - -#textbox {{ - text-color: @foreground; -}} - -#inputbar {{ - children: [ prompt,textbox-prompt-colon,entry,case-indicator ]; -}} - -#textbox-prompt-colon {{ - expand: false; - str: ":"; - margin: 0px 0.3em 0em 0em; - text-color: @normal-foreground; -}} - -#listview {{ - fixed-height: 0; - border: 2px 0px 0px; - border-color: @border-color; - spacing: 2px; - scrollbar: true; - padding: 2px 0px 0px; -}} - -#element {{ - border: 0; - padding: 1px; -}} - -#element-text, element-icon {{ - background-color: inherit; - text-color: inherit; -}} - -#element.normal.normal {{ - background-color: @normal-background; - text-color: @normal-foreground; -}} - -#element.normal.urgent {{ - background-color: @urgent-background; - text-color: @urgent-foreground; -}} - -#element.normal.active {{ - background-color: @active-background; - text-color: @active-foreground; -}} - -#element.selected.normal {{ - background-color: @selected-normal-background; - text-color: @selected-normal-foreground; -}} - -#element.selected.urgent {{ - background-color: @selected-urgent-background; - text-color: @selected-urgent-foreground; -}} - -#element.selected.active {{ - background-color: @selected-active-background; - text-color: @selected-active-foreground; -}} - -#element.alternate.normal {{ - background-color: @alternate-normal-background; - text-color: @alternate-normal-foreground; -}} - -#element.alternate.urgent {{ - background-color: @alternate-urgent-background; - text-color: @alternate-urgent-foreground; -}} - -#element.alternate.active {{ - background-color: @alternate-active-background; - text-color: @alternate-active-foreground; -}} - -#scrollbar {{ - width: 4px; - border: 0; - handle-width: 8px; - padding: 0; -}} - -#sidebar {{ - border: 2px 0px 0px; - border-color: @border-color; -}} - -#button {{ - text-color: @normal-foreground; -}} - -#button.selected {{ - background-color: @selected-normal-background; - text-color: @selected-normal-foreground; -}} - -#inputbar {{ - spacing: 0; - text-color: @normal-foreground; - padding: 1px; -}} - -#case-indicator {{ - spacing: 0; - text-color: @normal-foreground; -}} - -#entry {{ - spacing: 0; - text-color: @normal-foreground; -}} - -#prompt {{ - spacing: 0; - text-color: @normal-foreground; -}} diff --git a/config/wal/templates/colors-rofi-light.rasi b/config/wal/templates/colors-rofi-light.rasi deleted file mode 100644 index 57ea77c9..00000000 --- a/config/wal/templates/colors-rofi-light.rasi +++ /dev/null @@ -1,166 +0,0 @@ -* {{ - active-background: {color2}; - active-foreground: @foreground; - normal-background: @background; - normal-foreground: @foreground; - urgent-background: {color1}; - urgent-foreground: @foreground; - - alternate-active-background: @background; - alternate-active-foreground: @foreground; - alternate-normal-background: @background; - alternate-normal-foreground: @foreground; - alternate-urgent-background: @background; - alternate-urgent-foreground: @foreground; - - selected-active-background: {color1}; - selected-active-foreground: @foreground; - selected-normal-background: {color2}; - selected-normal-foreground: @foreground; - selected-urgent-background: {color3}; - selected-urgent-foreground: @foreground; - - background-color: @background; - background: rgba(255,255,255, 0.5); - foreground: {background}; - border-color: @background; - spacing: 2; -}} - -#window {{ - background-color: @background; - border: 0; - padding: 2.5ch; -}} - -#mainbox {{ - border: 0; - padding: 0; -}} - -#message {{ - border: 2px 0px 0px; - border-color: @border-color; - padding: 1px; -}} - -#textbox {{ - text-color: @foreground; -}} - -#inputbar {{ - children: [ prompt,textbox-prompt-colon,entry,case-indicator ]; -}} - -#textbox-prompt-colon {{ - expand: false; - str: ":"; - margin: 0px 0.3em 0em 0em; - text-color: @normal-foreground; -}} - -#listview {{ - fixed-height: 0; - border: 2px 0px 0px; - border-color: @border-color; - spacing: 2px; - scrollbar: true; - padding: 2px 0px 0px; -}} - -#element {{ - border: 0; - padding: 1px; -}} - -#element-text, element-icon {{ - background-color: inherit; - text-color: inherit; -}} - -#element.normal.normal {{ - background-color: @normal-background; - text-color: @normal-foreground; -}} - -#element.normal.urgent {{ - background-color: @urgent-background; - text-color: @urgent-foreground; -}} - -#element.normal.active {{ - background-color: @active-background; - text-color: @active-foreground; -}} - -#element.selected.normal {{ - background-color: @selected-normal-background; - text-color: @selected-normal-foreground; -}} - -#element.selected.urgent {{ - background-color: @selected-urgent-background; - text-color: @selected-urgent-foreground; -}} - -#element.selected.active {{ - background-color: @selected-active-background; - text-color: @selected-active-foreground; -}} - -#element.alternate.normal {{ - background-color: @alternate-normal-background; - text-color: @alternate-normal-foreground; -}} - -#element.alternate.urgent {{ - background-color: @alternate-urgent-background; - text-color: @alternate-urgent-foreground; -}} - -#element.alternate.active {{ - background-color: @alternate-active-background; - text-color: @alternate-active-foreground; -}} - -#scrollbar {{ - width: 4px; - border: 0; - handle-width: 8px; - padding: 0; -}} - -#sidebar {{ - border: 2px 0px 0px; - border-color: @border-color; -}} - -#button {{ - text-color: @normal-foreground; -}} - -#button.selected {{ - background-color: @selected-normal-background; - text-color: @selected-normal-foreground; -}} - -#inputbar {{ - spacing: 0; - text-color: @normal-foreground; - padding: 1px; -}} - -#case-indicator {{ - spacing: 0; - text-color: @normal-foreground; -}} - -#entry {{ - spacing: 0; - text-color: @normal-foreground; -}} - -#prompt {{ - spacing: 0; - text-color: @normal-foreground; -}} -- cgit v1.2.3