diff options
Diffstat (limited to 'archive')
| -rwxr-xr-x | archive/release.sh | 155 | ||||
| -rwxr-xr-x | archive/upgrade.sh | 216 |
2 files changed, 371 insertions, 0 deletions
diff --git a/archive/release.sh b/archive/release.sh new file mode 100755 index 00000000..e29eaa79 --- /dev/null +++ b/archive/release.sh @@ -0,0 +1,155 @@ +#!/usr/bin/env bash +# /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ # +# For downloading dots from releases + +# Set some colors for output messages +OK="$(tput setaf 2)[OK]$(tput sgr0)" +ERROR="$(tput setaf 1)[ERROR]$(tput sgr0)" +NOTE="$(tput setaf 3)[NOTE]$(tput sgr0)" +INFO="$(tput setaf 4)[INFO]$(tput sgr0)" +WARN="$(tput setaf 1)[WARN]$(tput sgr0)" +CAT="$(tput setaf 6)[ACTION]$(tput sgr0)" +MAGENTA="$(tput setaf 5)" +ORANGE="$(tput setaf 214)" +WARNING="$(tput setaf 1)" +YELLOW="$(tput setaf 3)" +GREEN="$(tput setaf 2)" +BLUE="$(tput setaf 4)" +SKY_BLUE="$(tput setaf 6)" +RESET="$(tput sgr0)" + +# Check /etc/os-release for Ubuntu or Debian and warn about Hyprland version requirement +if grep -iqE '^(ID_LIKE|ID)=.*(ubuntu|debian)' /etc/os-release >/dev/null 2>&1; then + printf "\n%.0s" {1..1} + echo "${WARNING} These Dotfiles are only supported on Hyprland 0.51.1 or greater. Do not install on older revisions.${RESET}" + while true; do + echo -n "${CAT} Do you want to continue anyway? (y/N): ${RESET}" + read _continue + _continue=$(echo "${_continue}" | tr '[:upper:]' '[:lower:]') + case "${_continue}" in + y|yes) + echo "${NOTE} Proceeding on Ubuntu/Debian by user confirmation." + break + ;; + n|no|"") + printf "\n%.0s" {1..1} + echo "${INFO} Aborting per user choice. No changes made." + printf "\n%.0s" {1..1} + exit 1 + ;; + *) + echo "${WARN} Please answer 'y' or 'n'." + ;; + esac + done +fi + + +printf "\n%.0s" {1..1} +echo -e "\e[35m + ╦╔═┌─┐┌─┐╦ ╔╦╗┌─┐┌┬┐┌─┐ + ╠╩╗│ ││ │║ ║║│ │ │ └─┐ 2025 + ╩ ╩└─┘└─┘╩═╝ ═╩╝└─┘ ┴ └─┘ release.sh +\e[0m" +printf "\n%.0s" {1..1} + +echo "${WARNING}A T T E N T I O N !${RESET}" +echo "${SKY_BLUE}This script is meant to download from the "RELEASES" on the KooL Hyprland-Dots${RESET}" +echo "${YELLOW}Kindly note that the RELEASES is one version older that from main${RESET}" +printf "\n%.0s" {1..1} +echo "${MAGENTA}If you want to get the latest, kindly ran the ${SKY_BLUE}copy.sh${RESET} ${MAGENTA}instead${RESET}" +printf "\n%.0s" {1..1} +read -p "${CAT} - Would you like to proceed and install from releases? (y/n): ${RESET}" proceed + +if [ "$proceed" != "y" ]; then + printf "\n%.0s" {1..1} + echo "${INFO} Installation aborted. ${SKY_BLUE}No changes in your system.${RESET} ${YELLOW}Goodbye!${RESET}" + printf "\n%.0s" {1..1} + exit 1 +fi + +printf "${NOTE} Downloading / Checking for existing Hyprland-Dots.tar.gz...\n" + +# Check if Hyprland-Dots.tar.gz exists +if [ -f Hyprland-Dots.tar.gz ]; then + printf "${NOTE} Hyprland-Dots.tar.gz found.\n" + + # Get the version from the existing tarball filename + existing_version=$(echo Hyprland-Dots.tar.gz | grep -oP 'v\d+\.\d+\.\d+' | sed 's/v//') + + # Fetch the tag_name for the latest release using the GitHub API + latest_version=$(curl -s https://api.github.com/repos/JaKooLit/Hyprland-Dots/releases/latest | grep "tag_name" | cut -d '"' -f 4 | sed 's/v//') + + # Check if versions match + if [ "$existing_version" = "$latest_version" ]; then + echo -e "${OK} Hyprland-Dots.tar.gz is up-to-date with the latest release ($latest_version)." + + # Sleep for 10 seconds before exiting + printf "${NOTE} No update found. Sleeping for 10 seconds...\n" + sleep 10 + exit 0 + else + echo -e "${WARN} Hyprland-Dots.tar.gz is outdated (Existing version: $existing_version, Latest version: $latest_version)." + read -p "Do you want to upgrade to the latest version? (y/n): " upgrade_choice + if [ "$upgrade_choice" = "y" ]; then + echo -e "${NOTE} Proceeding to download the latest release." + + # Delete existing directories starting with JaKooLit-Hyprland-Dots + find . -type d -name 'JaKooLit-Hyprland-Dots*' -exec rm -rf {} + + rm -f Hyprland-Dots.tar.gz + printf "${WARN} Removed existing Hyprland-Dots.tar.gz.\n" + else + echo -e "${NOTE} User chose not to upgrade. Exiting..." + exit 0 + fi + fi +fi + +printf "${NOTE} Downloading the latest Hyprland source code release...\n" + +# Fetch the tag name for the latest release using the GitHub API +latest_tag=$(curl -s https://api.github.com/repos/JaKooLit/Hyprland-Dots/releases/latest | grep "tag_name" | cut -d '"' -f 4) + +# Check if the tag is obtained successfully +if [ -z "$latest_tag" ]; then + echo -e "${ERROR} Unable to fetch the latest tag information." + exit 1 +fi + +# Fetch the tarball URL for the latest release using the GitHub API +latest_tarball_url=$(curl -s https://api.github.com/repos/JaKooLit/Hyprland-Dots/releases/latest | grep "tarball_url" | cut -d '"' -f 4) + +# Check if the URL is obtained successfully +if [ -z "$latest_tarball_url" ]; then + echo -e "${ERROR} Unable to fetch the tarball URL for the latest release." + exit 1 +fi + +# Get the filename from the URL and include the tag name in the file name +file_name="Hyprland-Dots-${latest_tag}.tar.gz" + +# Download the latest release source code tarball to the current directory +if curl -L "$latest_tarball_url" -o "$file_name"; then + # Extract the contents of the tarball + tar -xzf "$file_name" || exit 1 + + # delete existing Hyprland-Dots + rm -rf JaKooLit-Hyprland-Dots + + # Identify the extracted directory + extracted_directory=$(tar -tf "$file_name" | grep -o '^[^/]\+' | uniq) + + # Rename the extracted directory to JaKooLit-Hyprland-Dots + mv "$extracted_directory" JaKooLit-Hyprland-Dots || exit 1 + + cd "JaKooLit-Hyprland-Dots" || exit 1 + + # Set execute permission for copy.sh and execute it + chmod +x copy.sh + ./copy.sh 2>&1 | tee -a "../install-$(date +'%d-%H%M%S')_dots.log" + + echo -e "${OK} Latest source code release downloaded, extracted, and processed successfully." +else + echo -e "${ERROR} Failed to download the latest source code release." + exit 1 +fi diff --git a/archive/upgrade.sh b/archive/upgrade.sh new file mode 100755 index 00000000..45624c4f --- /dev/null +++ b/archive/upgrade.sh @@ -0,0 +1,216 @@ +#!/usr/bin/env bash +# /* ---- 💫 https://github.com/JaKooLit 💫 ---- */ # +# for Semi-Manual upgrading your system. +# NOTE: requires rsync + +# Set some colors for output messages +OK="$(tput setaf 2)[OK]$(tput sgr0)" +ERROR="$(tput setaf 1)[ERROR]$(tput sgr0)" +NOTE="$(tput setaf 3)[NOTE]$(tput sgr0)" +INFO="$(tput setaf 4)[INFO]$(tput sgr0)" +WARN="$(tput setaf 1)[WARN]$(tput sgr0)" +CAT="$(tput setaf 6)[ACTION]$(tput sgr0)" +MAGENTA="$(tput setaf 5)" +ORANGE="$(tput setaf 214)" +WARNING="$(tput setaf 1)" +YELLOW="$(tput setaf 3)" +GREEN="$(tput setaf 2)" +BLUE="$(tput setaf 4)" +SKY_BLUE="$(tput setaf 6)" +RESET="$(tput sgr0)" + +printf "\n%.0s" {1..1} +echo -e "\e[35m + ╦╔═┌─┐┌─┐╦ ╔╦╗┌─┐┌┬┐┌─┐ + ╠╩╗│ ││ │║ ║║│ │ │ └─┐ 2025 + ╩ ╩└─┘└─┘╩═╝ ═╩╝└─┘ ┴ └─┘ upgrade.sh +\e[0m" +printf "\n%.0s" {1..1} + +# On Ubuntu/Debian, warn about required Hyprland version and prompt to continue +if grep -iqE '^(ID_LIKE|ID)=.*(ubuntu|debian)' /etc/os-release >/dev/null 2>&1; then + echo "${WARNING} These Dotfiles are only supported on Hyprland 0.51.1 or greater. Do not install on older revisions.${RESET}" + while true; do + echo -n "${CAT} Do you want to continue anyway? (y/N): ${RESET}" + read _continue + _continue=$(echo "${_continue}" | tr '[:upper:]' '[:lower:]') + case "${_continue}" in + y|yes) + echo "${NOTE} Proceeding on Ubuntu/Debian by user confirmation." + break + ;; + n|no|"") + printf "\n%.0s" {1..1} + echo "${INFO} Aborting per user choice. No changes made." + printf "\n%.0s" {1..1} + exit 1 + ;; + *) + echo "${WARN} Please answer 'y' or 'n'." + ;; + esac + done +fi + +echo "${WARNING}A T T E N T I O N !${RESET}" +echo "${SKY_BLUE}This script is meant to manually upgrade your KooL Hyprland Dots${RESET}" +echo "${YELLOW}NOTE that you should edit this script and assign an Directory or Files exclusion${RESET}" +printf "\n%.0s" {1..1} +echo "${MAGENTA}If you are not sure what you are doing,ran the ${SKY_BLUE}copy.sh${RESET} ${MAGENTA}instead${RESET}" +printf "\n%.0s" {1..1} +read -p "${CAT} - Would you like to proceed (y/n): ${RESET}" proceed + +if [ "$proceed" != "y" ]; then + printf "\n%.0s" {1..1} + echo "${INFO} Installation aborted. ${SKY_BLUE}No changes in your system.${RESET} ${YELLOW}Goodbye!${RESET}" + printf "\n%.0s" {1..1} + exit 1 +fi + +# Create Directory for Upgrade Logs +if [ ! -d Upgrade-Logs ]; then + mkdir Upgrade-Logs +fi + +LOG="Upgrade-Logs/upgrade-$(date +%d-%H%M%S)_upgrade_dotfiles.log" + +# source and target versions +source_dir="config" +target_dir="$HOME/.config" + +# Specify the update source directories, their corresponding target directories, and their exclusions +declare -A directories=( + ["config/hypr/"]="$HOME/.config/hypr/" + ["config/kitty/"]="$HOME/.config/kitty/" + ["config/Kvantum/"]="$HOME/.config/Kvantum/" + ["config/nvim/"]="$HOME/.config/nvim/" + ["config/qt5ct/"]="$HOME/.config/qt5ct" + ["config/qt6ct/"]="$HOME/.config/qt6ct/" + ["config/rofi/"]="$HOME/.config/rofi/" + ["config/swaync/"]="$HOME/.config/swaync/" + ["config/waybar/"]="$HOME/.config/waybar/" + ["config/cava/"]="$HOME/.config/cava/" + ["config/ags/"]="$HOME/.config/ags/" + ["config/quickshell/"]="$HOME/.config/quickshell/" + ["config/fastfetch/"]="$HOME/.config/fastfetch/" + ["config/wallust/"]="$HOME/.config/wallust/" + ["config/wlogout/"]="$HOME/.config/wlogout/" + # Add more directories to compare as needed +) + +# Update the exclusion rules +declare -A exclusions=( + ["config/hypr/"]="--exclude=UserConfigs/ --exclude=UserScripts/" + ["config/waybar/"]="--exclude=config --exclude=style.css" + ["config/rofi/"]="--exclude=.current_wallpaper" + ["config/quickshell/"]="--exclude=shell.qml" + # Add more exclusions as needed +) + +# Function to compare directories +compare_directories() { + local source_dir="$1" + local target_dir="$2" + local exclusion="${exclusions[$source_dir]}" # Get exclusions for the source directory + + # Perform dry-run comparison using rsync with exclusions + diff=$(rsync -avn --delete "$source_dir" "$target_dir" $exclusion) + echo "$diff" +} + +# Function to create backup of target directory +create_backup() { + local target_dir="$1" + local backup_suffix="-b4-upgrade" + local target_base=$(basename "$target_dir") + local backup_dir="$HOME/.config/${target_base}${backup_suffix}" + + if [ -d "$backup_dir" ]; then + echo "$NOTE Updating existing backup of the $target_dir..." + rsync -av --delete "$target_dir" "$backup_dir" + echo "$NOTE $backup_dir Backup updated successfully." 2>&1 | tee -a "$LOG" + else + echo "$NOTE Creating backup of the $target_dir..." + rsync -av --exclude="${backup_suffix}" "$target_dir" "$backup_dir"/ + echo "$NOTE $backup_dir Backup created successfully." 2>&1 | tee -a "$LOG" + fi +} + +# Check if the version file exists in target directory, if not exit +target_version_file=$(find "$target_dir/hypr" -name 'v*' | sort -V | tail -n 1) +if [ -z "$target_version_file" ]; then + echo "$ERROR Version number not found in ~/.config/hypr/" 2>&1 | tee -a "$LOG" + echo "$ERROR Upgrade your dots first by running ./copy.sh" 2>&1 | tee -a "$LOG" + exit 1 +fi + +# Get the stored version from the target directory +stored_version=$(basename "$target_version_file") + +# Get the latest version from the source directory +source_version_file=$(find "$source_dir/hypr" -name 'v*' | sort -V | tail -n 1) +latest_version=$(basename "$source_version_file") + +# Function to compare versions +version_gt() { test "$(printf '%s\n' "$@" | sort -V | head -n 1)" != "$1"; } + +# Compare versions +if version_gt "$latest_version" "$stored_version"; then + echo "$CAT newer version ($latest_version) is available. Do you want to upgrade? (Y/N)" 2>&1 | tee -a "$LOG" + read -r answer + if [[ "$answer" =~ ^[Yy]$ ]]; then + # Loop through directories for comparison + for source_directory in "${!directories[@]}"; do + target_directory="${directories[$source_directory]}" + echo "$YELLOW Comparing directories: $source_directory and $target_directory" $RESET + # Compare source and target directories + comparison=$(compare_directories "$source_directory" "$target_directory") + if [ -n "$comparison" ]; then + echo "$NOTE Here are difference of $source_directory and $target_directory:" + echo "$comparison" + + printf "\n%.0s" {1..2} + + # Prompt user for action + echo "$CAT Do you want to copy files and directories from $source_directory to $target_directory? (Y/N)" + read -r answer + + if [[ "$answer" =~ ^[Yy]$ ]]; then + # Creating backup of the target directory + create_backup "$target_directory" + + printf "\n%.0s" {1..2} + # Copy differences from source directory to target directory + rsync -av --delete ${exclusions[$source_directory]} "$source_directory" "$target_directory" + echo "$NOTE Differences of "$target_directory" copied successfully." 2>&1 | tee -a "$LOG" + printf "\n%.0s" {1..2} + else + echo "$NOTE No changes were made for $target_directory" 2>&1 | tee -a "$LOG" + fi + else + echo "$OK No differences found between $source_directory and $target_directory" 2>&1 | tee -a "$LOG" + fi + done + printf "\n%.0s" {1..2} + echo "$NOTE Files or directories updated successfully to version $latest_version" 2>&1 | tee -a "$LOG" + + # Set some files as executable + chmod +x "$HOME/.config/hypr/scripts/"* 2>&1 | tee -a "$LOG" + chmod +x "$HOME/.config/hypr/UserScripts/"* 2>&1 | tee -a "$LOG" + # Set executable for initial-boot.sh + chmod +x "$HOME/.config/hypr/initial-boot.sh" 2>&1 | tee -a "$LOG" + + else + echo "$MAGENTA Upgrade declined. No files or directories changed" 2>&1 | tee -a "$LOG" + fi +else + echo "$OK 👌 No upgrade found. The installed version ${MAGENTA}($stored_version)${RESET} is up to date with the KooL Hyprland-Dots version ${YELLOW}($latest_version)${RESET}" 2>&1 | tee -a "$LOG" +fi + +printf "\n%.0s" {1..3} +echo "$(tput bold)$(tput setaf 3)ATTENTION!!!! VERY IMPORTANT NOTICE!!!! $(tput sgr0)" +echo "$(tput bold)$(tput setaf 7)If you updated waybar directory, and you have your own waybar layout and styles $(tput sgr0)" +echo "$(tput bold)$(tput setaf 7)Copy those files from the created backup ~/.config/waybar-b4-upgrade $(tput sgr0)" +echo "$(tput bold)$(tput setaf 7)Make sure to set your waybar and style before logout or reboot $(tput sgr0)" +echo "$(tput bold)$(tput setaf 7)SUPER CTRL B for Waybar Styles and SUPER ALT B for Waybar Layout $(tput sgr0)" +printf "\n%.0s" {1..3} |